American Standard 2097.012 NEW Savona ONE-PIECE Toilet, Repair Parts List, Adjustments

9	TOP		ARM	REFILL
			NIPPLE
				TUBE
			TANK
	CRITICAL LEVEL		LEVER
				Fig. 9A
	MARK ("C.L.")
	MUST BE
	1" ABOVE			"S"
	OVERFLOW PIPE
		FLOAT		CLIP
		CUP
	FILL			FLUSH
	VALVE			VALVE
	VALVE
	BODY		WATER LEVEL
			ADJUSTMENT
			ROD
	ADJUSTABLE
	HEIGHT		FLAPPER
			SHANK
			WASHER
	LOCK NUT		THREADED
			SHANK
	CONE WASHER
			PARTS FOR WATER
	COUPLING NUT		CONNECTION
			(SEE STEP 9)
	(HAND TIGHT ONLY)
				Diagram 1

ADJUSTMENTS

a.Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup.

See Step 10 for water level adjustment method.

b.If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the bead chain from the retainment clip (see Fig. 9A) and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught.

10

Turn on water supply. Submerge the FLOAT CUP under the water for 30 seconds. Adjust the water to desired level by turning

WATER LEVEL ADJUSTMENT ROD and moving FLOAT CUP up or down.

11 CARE AND CLEANING

When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish.

!WARNING: Do not use in-tank cleaners. Products containing chlorine (calcium hypochlorite) can seriously damage fittings in the tank. This damage can cause leakage and property damage.

American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite).

FLUIDMASTER

WATER CONTROL

FLUSH VALVE

TANK COVER

FLAPPER

ASSEMBLY

SEAT AND COVER

(INCLUDES MTG. KIT)

SEAT POST

MTG. KIT

TRIP

LEVER

BOLT

CAPS

NEW SAVONA ONE-PIECE TOILET

REPAIR PARTS LIST

NOTE: "XXX" represents color options. Specify when ordering.

COMPONENT	DESCRIPTION	1.6
		GPF
735146-400.XXX0A	Tank Cover	√
5205.110.XXX	Seat - Elongated	√
730835.XXX	Bolt Cap Kit Cover	√
7381059-200.XXX	Trip Lever - Right Hand	-
738565-441.0070A	Inlet Valve	√
738942-1000A	Flush Valve - 1.6 GPF	√
738920-0070A	Flapper Assembly - 1.6 GPF	√

- 3 - 7301387-100