American Standard 2100.016 dimensions Cadet Elongated One-Piecetoilet, Nominal Dimensions

CADET™

ELONGATED ONE-PIECE TOILET

VITREOUS CHINA

CADET™ ELONGATED ONE-PIECE TOILET

❑2100.016

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•One-piece design

•Elongated siphon action jetted bowl with 2" trapway

•Rim height at 381mm (15")

•Includes color-matched solid plastic “Rise and Shine” seat and cover (#5324.019) with easy-to-clean lift off hinge system

•Color-matched trip lever

•2 bolt caps

•Internal trapway area fully glazed

•100% factory flush tested

Nominal Dimensions:

762 x 457 x 679mm (30" x 18" x 26-3/4")

Fixture only, supply by others

Compliance Certifications -

Meets or Exceeds the Following Specifications:

•ASME A112.19.2M for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

To Be Specified:

❑Color:

❏White ❏ Bone ❏ Linen ❏ Silver

❏Fawn Beige ❏ Black

❑Trip Lever: 047242-XXX0A ❑ Color-matched (supplied)

❑002 Chrome

❑099 Polished Brass

❑295 Satin Nickel

❏Supply with Stop:

		FINISHED WALL
			762mm
			(30)
	19 ± 6mm
(3/4 ± 1/4)
			C/L OF SEAT
		206mm	POST HOLES			497mm
		(8-1/8)	140mm (5-1/2)		(15-5/8)
			CENTERS
				473mm
				(18-5/8)

			679mm
			(26-3/4)
	375mm
	(14-3/4)	SUPPLY AS
		REQ'D
		FINISHED
		FLOOR
79mm (3-1/8)	16mm	*140mm
	(5/8)		FINISHED
		(5-1/2)	FLOOR
			*133mm(5-1/4)
159mm	324mm		241mm
(6-1/4)	(12-3/4)
			(9-1/2)
305mm	C/L OF OUTLET		457mm
(12)
			(18)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.

*DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

	K16
© 2008 AS America Inc.		Revised 2/08