Bryant 558J manual Curbs & Weights Dimensions Chassis, Base Unit Dimensions Chassis

558J

CURBS & WEIGHTS DIMENSIONS - CHASSIS 1

Corner

A

Corner

D

Corner

B

Corner
C	7”
	6 1/8”
	11 3/8”
	10 1/2”
	19 1/2”
	16 1/4”
	22”

21 1/4”

33 3/8”

16”

74 3/8”

C08001

J 19 1/2”

6 5/8”

4 5/8”

K

C08000

Table 7 – BASE UNIT DIMENSIONS - CHASSIS 1

UNIT	OPERATING	SHIPPING	J		CORNER WEIGHTS (LB)				CENTER OF GRAVITY (IN)
	WGT (LB)	WGT (LB)		A		B	C	D	X	Y	HEIGHT
04	438	475	33 5/16”	108		115	110	104	38	23	17 1/4
05	494	530	33 5/16”	122		130	125	117	38	23	17 1/2
06	524	560	33 5/16”	130		138	132	124	38	23	17 3/4
07	607	645	41 5/16”	150		160	153	144	38	23	20 3/4

NOTES:

1.If one side has at least 36” (914mm) of clearance, the opposite side can be reduced to 12” (305mm). Make sure to plan for OA handler, if equipped.

2.Clearance of 0” requires use of an alternate drain con- nection.

3.Maintain 36” (914mm) between control box and groun- ded surface or 42” (1067mm) between control box and ungrounded surfaces (concrete or block wall).

4.Keep combustible material at 36” (914mm) away from the flue discharge. Accessory flue discharge deflector may allow smaller clearance.

5.Units shown with optional economizer.

6.Local codes and jurisdictions may prevail.

7.Height is measured from bottom of base rail.

16