10
REFILL
ADJUSTMENTS
a. Adjust water level. Water level |
should be adjusted to level indicated |
11
FILL
VALVE
THREADED
SHANK
LOCK NUT
COUPLING NUT (HAND TIGHT ONLY)
TANK TUBE LEVER
FLOAT
CUP
FLAPPER
HOOK
FLUSH
VALVE
Diagram 1
on tank by adjusting float cup. |
See Step 11 for water level adjustment method.
b.If bowl fails to siphon, an adjustment may be required with the lift chain. Simply remove the chain from
the retainment clip and take up slack on the chain, and reinsert on lift rod. Make sure the chain is not too taught.
TAB
FLOAT
CUP
Turn on water supply. Let the toilet cycle once. Adjust the water to desired level by depressing TAB on FLOAT CUP and moving FLOAT CUP up or down.
12
CARE AND CLEANING
When cleaning your toilet, wash it with mild, soapy water, rinse thoroughly with clear water and dry with a soft cloth. Avoid detergents, disinfectants, or cleaning products in aerosol cans. NEVER use abrasive scouring powders or abrasive pads on your toilet seat. Some bathroom chemicals and cosmetics may damage the seat's finish.
!WARNING: Do not use
American Standard shall not be responsible or liable for any tank fitting damage caused by the use of cleaners containing chlorine (calcium hypochlorite).
REPAIR PARTS LIST
Repair parts are determined by toilet tank number which can be found marked inside tank. NOTE: "XXX" represents color or trim finish options. Specify when ordering.
PART NO. | DESCRIPTION |
4037 TANK COVER | |
4392 TANK COVER | |
7381006.402.0070A | FLUIDMASTER 300A VALVE |
FLUIDMASTER REFILL TUBE | |
FLUIDMASTER REFILL CLIP | |
FLUIDMASTER FLUSHVALVE | |
FLUIDMASTER FLUSHVALVE | |
TANK COUPLING KIT #232 | |
FLUIDMASTER FLAPPER ASSEMBLY | |
FLUIDMASTER FLAPPER ASSEMBLY | |
TRIP LEVER ASSEMBLY LH | |
BOLT CAP KIT #128 | |
5329.XXX | SEAT |
TANK NUMBER
4037 | 4392 | 4037 W/LINER | 4392 W/LINER |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- 3 - |
