1 SPOUT ASSEMBLY

CAUTION

Turn off hot and cold water

supplies before beginning.

Install RING WASHER (1) into SPOUT BASE recess. Check that O-RING (2) on end of SPOUT SHANK (3) is in place. Insert SPOUT SHANK (3) through SPOUT ESCUTCHEON (4) and into center hole on mounting surface.

Assemble RUBBER WASHER (5) and LOCKNUT (6) onto SPOUT SHANK (1). Align SPOUT ASSEMBLY and from underside of ledge secure SPOUT ASSEMBLY into position with LOCKNUT (6).

SPOUT

ASSEMBLY

SPOUT BASE

 

1

2

 

 

RECESS

 

 

 

 

 

 

2

3

 

 

 

 

 

 

4

MOUNTING

 

 

 

SURFACE

5

6

3 VALVE ASSEMBLY

2 PREPARE TUBE AND TEE ASSEMBLY

Prepare TUBE and TEE ASSEMBLY (1) to fit center to center VALVE (2) location (between 6-1/2" and 12"). If necessary, cut and/or bend TUBING carefully. Make sure tube bend is close to the TEE (1) so that it will not effect the compression joint at the VALVE CONNECTION.

Remove COUPLING NUT (3) and FERRULE (4) from each VALVE (2) and slide onto TUBING (5).

4

3

1

5

3

4

ADJ. 6-1/2 TO 12

MOUNTING

SURFACE

2

NOTE VALVE inlet is 3/4-inch NPT male.

Install LOCKNUTS (1) and RUBBER WASHERS (2) onto valve shanks.

Push TUBING (3) ends into VALVE (4) side outlets. Insert VALVES (4) into mounting holes from underside of ledge.

Press TEE (5) onto SPOUT SHANK (6) making certain that the O-RING (7) is properly seated on SHANK (6). Push COUPLING (8 or 8a) into TEE (5) and attach to SPOUT SHANK (6) and tighten. Note: For product with Hand Shower, COUPLING (8) is tightened using a 10mm (3/8”)

Hex Wrench.

Thread of VALVE BODY (4) should extend at least 5/16 inch above MOUNTING SURFACE (11). If necessary, adjust LOCKNUT (1).

9

11 MOUNTING SURFACE

10

9

Place RUBBER RING (10) into ESCUTCHEON ADAPTERS (9) and thread onto valves until snug against internal stop.

Tighten LOCKNUT (1) to secure VALVE (4) position.

10

4

Slide FERRULE (12) and COUPLING NUT (13) to outlet of VALVE (4) and tighten COUPLING NUT (13) firmly.

Connect HOT water supply to inlet of

 

left VALVE and COLD water supply to

9

inlet of right VALVE using appropriate

10

connector.

 

12

HOT

7

13 6

5/16'' MIN.

4

11

MOUNTING

3

 

12

4

 

 

 

 

 

 

SURFACE

 

5

 

 

 

 

 

 

 

 

 

 

 

2

FOR FITTING

8a

8

 

 

 

 

 

 

 

 

 

1

LESS SPRAY

 

13

 

COLD

 

 

 

 

 

 

 

 

 

 

 

M968288 Rev. 1 . 1

Page 2
Image 2
American Standard 2373.921, 2373.920, 2373.901, 2373.900 Spout Assembly, Prepare Tube and TEE Assembly, ADJ -1/2 to, 16 MIN

2373.900, 2373.921, 2373.901, 2373.920 specifications

The American Standard 2373.900, 2373.921, 2373.901, and 2373.920 are a series of high-quality bathroom sink faucets designed to blend style, functionality, and innovation. These models are distinguished by their modern aesthetic, making them ideal for contemporary bathrooms while maintaining American Standard's commitment to durability and ease of use.

One of the standout features of these faucet models is their EcoPulse technology, which promotes water conservation without sacrificing performance. EcoPulse reduces water flow to 1.2 gallons per minute while maintaining strong pressure, thus helping homeowners save on water bills without compromising the user experience. This feature is particularly appealing to environmentally conscious consumers looking for sustainable solutions for their homes.

In terms of design, the 2373 series boasts sleek lines and geometric shapes, available in various finishes including polished chrome and satin nickel. These finishes not only offer visual appeal but also provide a layer of protection against scratches and tarnishing, ensuring that the faucets maintain their beauty over time. The minimalist design makes it easy to integrate these faucets into any bathroom decor, from traditional to modern styles.

Installation of the American Standard 2373 faucets is user-friendly, as they come with a pre-attached mounting system that simplifies the process, allowing for a seamless setup. Additionally, the faucets feature a ceramic disc cartridge, which ensures a leak-free operation and provides long-lasting performance. This technology enhances durability and reduces the likelihood of maintenance issues, making these faucets a smart investment for any homeowner.

Another key characteristic of the 2373 series is its user-centered design. The faucets are equipped with easy-grip handles that allow for smooth operation, even when hands are wet or soapy. The ergonomic design ensures that the user experience is comfortable and convenient, particularly in busy bathroom settings.

Overall, the American Standard 2373.900, 2373.921, 2373.901, and 2373.920 faucets combine stylish design with practical features and innovative technology. Their emphasis on water conservation, ease of installation, and long-lasting performance make them an excellent choice for anyone looking to upgrade their bathroom fixtures. By choosing these faucets, homeowners not only enhance the aesthetic appeal of their bathrooms but also contribute to a more sustainable future.