7 |
|
|
|
|
TEST INSTALLED FAUCET |
| CAUTION |
| |
The flow rate of this Tub Filler exceeds 20 gallons/minute | ||||
|
| at higher water pressure. Do not fill bathtub unattended. | ||
Turn VALVES (1) to "off" position.
With handles in "off" position, turn on water supplies and check all connections for leaks.
Operate both handles and flush water lines thoroughly.
Check SPOUT (2) mounting for leaks.
Lift HAND SHOWER (3) from holder, direct spray into tub, lift TRANSFER KNOB (4) to check HAND SHOWER (3) and HOSES for leaks.
Turn VALVES "off."
If spout drips, operate handles several times from OFF to ON position. Do not force - handles turn only 90°.
1 4 1
3
2 
8 | Before the bathroom is completely finished, you may |
| want to remove spout, hand shower, and handles. |
To remove handles, reverse steps in section 4.
To remove SPOUT (1), proceed as follows:
Lift TRANSFER ROD (8) and unscrew KNOB (2).
Remove PLUG BUTTON (3) and remove SET SCREW (4) using 5mm hex wrench supplied.
2
4
3
1
Hex wench, supplied
Lift SPOUT (1) off SHANK (5) carefully and remove RUBBER RING (6).
Unscrew SHANK SLEEVE (7) and lift TRANSFER ROD (8) from SHANK (5).
Reverse sequence to
6
8
7
5
9 EverClean™ Finish Care Instructions
American Standard’s EverClean finish will wipe clean with a soft, dry cloth. A soft cloth with clean water may also be used, if desired. No additional cleaning products are required.
DO NOT USE: Soaps, acid, polish, abrasives, harsh cleaners, or a cloth with a coarse surface.
HOT LINE FOR HELP
For
1 (800)
Weekdays 8:00 a.m. to 8:00 p.m. EST
IN MEXICO
IN CANADA
Weekdays 8:00 a.m. to 7:00 p.m. EST
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c . © A m e r i c a n S t a n d a r d I n c . 2 0 0 2
M968288 Rev. 1 . 1
