General Installation Information
Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately. After inspection and during installation, protect the bath from construction damage. Before installation, and before enclosing with wallboard, tile, etc., the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage or mishandling! Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system. Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others.
For electrical requirements, refer to section titled “Whirlpool Electrical Installation Instructions”.
Check for availability of optional American Standard wall tiling bead (required for recess installation). Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.
!WARNING: Do not lift whirlpool by the piping harness at any time.
List of Required Tools and Supplies:
Tools | Supplies | ||
• | Level | • | Nails |
• Tape Measure | • Putty | ||
• | Pipe Wrench | • | Caulking (waterproof) |
• | Slip Joint Pliers | • | 1 x Stringers |
• | Screw Driver | • | Drop Cloth |
• | Standard Woodworking Tools | • | Cement, Plaster, Grout |
•Personal Safety Equipment
•Caulking Gun
LIST OF OPTIONAL COMPONENTS (NOT INCLUDED):
|
| Optional Components | Required Components |
| |||||
|
| (Not Included) |
| (Not Included) |
| ||||
Description | Model |
|
|
|
|
|
|
|
|
Apron |
| Tile | Drain • | Drain • |
| Bath | |||
| Number | Install |
| Bead | (White) | (Specify |
| ||
| Kit |
|
| Filler • | |||||
| Heater |
| Kit |
| |||||
|
|
|
|
| Finish) |
|
| ||
Lifetime™/Evolution™ Corner | 00 | INCLUDED | 0707.00 |
| X | 15.500.00 | 153.70.XXX |
| X |
|
|
|
|
|
|
|
|
| |
Lifetime™/Evolution™ 5' x 3" | X | 1.01 |
| X | 15.500.00* | 15.05.XXX* | X | ||
|
|
|
|
|
|
|
|
| |
Lifetime™/Evolution™ 5' x 3" | 771 | X | 1.01 |
| X | 15.500.00* | 15.05.XXX* | X | |
|
|
|
|
|
|
|
|
| |
Lifetime™/Evolution™ ' x 3" | 73 | X | 71.01 |
| X | 15.500.00* | 15.05.XXX* | X | |
|
|
|
|
|
|
|
|
|
|
Lifetime™/Evolution™ 5' x 3" IA | 5 | X | INTEGRAL |
|
| 15.500.00* | 15.05.XXX* |
| X |
|
|
|
|
|
|
|
|
|
|
Lifetime™/Evolution™ Oval | 5 | X | .01 |
| X | 15.500.00 | 153.70.XXX |
| X |
|
|
|
|
|
|
|
|
|
|
Lifetime™ Savona | 01 | X | NOT |
| X | 15.500.00 | 153.70.XXX |
| X |
AVAILABLE |
|
| |||||||
|
|
|
|
|
|
|
|
| |
Lifetime™ Reminiscence | 0 | X | NOT |
| X | 15.500.00 | 153.70.XXX |
| X |
AVAILABLE |
|
| |||||||
Lifetime™ Ellisse | 711 | X | NOT |
|
| 15.500.00 | 153.70.XXX |
| X |
AVAILABLE |
|
|
| ||||||
Lifetime™ Cadet ' x 3" | 773 | X | 7.01 |
| X | 15.500.00 | 153.70.XXX |
| X |
|
|
|
|
|
|
|
|
|
|
Lifetime™ Cadet ' x " | 77 | X | 7.01 |
| X | 15.500.00 | 153.70.XXX |
| X |
|
|
|
|
|
|
|
|
|
|
Lifetime™ Cadet Corner | 775 | X | NOT |
| X | 15.500.00 | 153.70.XXX |
| X |
AVAILABLE |
|
| |||||||
|
|
|
|
|
|
|
|
| |
Lifetime™ 5' x " | 05 | X | 10.00 |
| X | 153.70.00 | 153.70.XXX |
| X |
|
|
|
|
|
|
|
|
|
|
• For these components please see your Vendor.
*These models require American Standard Lifetime™ Drain 15.05 or 15.500
