American Standard 2748.XXXW installation instructions List of Optional Components not included

TOWN SQUARE® 5' x 42"™

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2748.XXXW SERIES

WHIRLPOOL/BATHING POOL INSTALLATION INSTRUCTIONS

		59-1/2"
ON/OFF		(1511mm)		3"
			INTEGRAL
SWITCH
	29-7/8"		FITTING DECK	(76mm)
			2-1/2" X 14"	5-1/4"
	(759mm)
			(64 X 356mm)	(133mm)
14-1/2"
(368mm)				C/L OF
				DRAIN
41-5/8"				OUTLET
				EDGE OF
(1057mm)
PROVIDE ACCESS	FLOOR CUTOUT			FLOOR
	5" X 12"			CUTOUT
TO PUMP FOR	(127 X 305mm)
SERVICE ON ALL
INSTALLATIONS
PUMP
				3/4"
				(19mm)
OUTLINE OF	JETS (6)	SUCTION	OUTLINE OF CUTOUT
SKID RESISTANT			58-1/4" X 40-1/4"
SURFACE			(1480 X 1022mm)

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool. To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

•Tile Bead Kit (P/N 751755-200)

•5 Foot Apron 9460.018

•Safe-T-Heater 9075.120*

List of Required Components (not included):

• Drain 1594.170

• Bath Filler

2"

(51mm)

5-3/4" (146mm)

	PUMP	LEVELING STRINGER
		(NOT FOR SUPPORT)
C/L OF	SAFE-T-HEATER
OVERFLOW	REMOVABLE
	BLANK
			23"
			(584mm)
		ROUGH	21"
			(533mm)
		FLOOR

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth

			1-1/2" N.P.T.	INTEGRAL
			THREADS	FEET
3-1/8"				SUPPORT
	3/4"		1-1/2" O.D.
(79mm)		(19mm)	TAILPIECE

HOLE DRILLING LOCATION FOR AMERICAN STANDARD "TOWN SQUARE"

DECK MOUNT BATH FILLER WITH PERSONAL SHOWER, MODEL #2555.901 ONLY

	Woodworking Tools	•	15 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

29-7/8				C/L
	(759mm)					DRAIN
		TO END
							FITTINGS
		OF TUB
							DECK
FOR SPOUT								FOR HAND
& VALVES
								SPRAY
1-1/2
(38mm)			2-1/2					EDGE OF
								FITTINGS
			(64mm)
1-1/2
			4-1/2	4-1/2	5			1-1/2 DECK
(38mm)
			(114mm)	(114mm) (127mm)			(38mm)

GENERAL INSTALLATION INFORMATION

GENERAL SPECIFICATIONS FOR 2742 WHIRLPOOL

INSTALLED SIZE		71-1/2 x 41-3/4 x 22 In. (1816 x 1060 x 559mm)
WEIGHT					115 Lbs. (52 Kg.)
WEIGHT w/WATER					690 Lbs. (313 Kg.)
GAL. TO OVERFLOW					69 Gal. (261 L)
WHIRLPOOL MIN. OPERATING VOL.					60 Gal. (227 L)
BATHING WELL AT SUMP			41 x 21-1/2 In. (1041 x 546mm)
BATHING WELL AT RIM			62 x 31-1/2 In. (1574 x 800mm)
WATER DEPTH TO OVERFLOW					14-1/4 In. (362mm)
FLOOR LOADING				33 Lbs./Sq.Ft. (163 Kgs./Sq.m)
(PROJECTED AREA)
PTS.						27.8
CUBE (FT3)							55.7
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
WHIRLPOOL PUMP					2.1 HP, 14.4 AMPS ,120V.

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately. After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

Do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations). If installing American Standard 2555.901 "Town Square" deck mount bath filler, please refer to hole drilling location above.

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

WARNING! Do not lift whirlpool by the piping harness at any time.

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS. © American Standard Inc. 2007

753026-100 Rev. G	All product names listed herein are trademarks
	of American Standard Inc. unless otherwise noted.