American Standard 2770.XXXW Series installation instructions General Installation Information

CADET™ 5' x 32"

HIGH GLOSS ACRYLIC SHOWN LESS ALL FITTINGS

2770.XXXW SERIES

WHIRLPOOL/BATHING POOL

INSTALLATION INSTRUCTIONS

222mm (8-3/4)

19 mm (3/4)

FINISHED

EEFITTING WALL PECS FOR MENSIONS

806mm (31-3/4)

403 mm

(15-7/8)

C/L OF

SUPPLIES

PROVIDE ACCESS TO PUMP FOR SERVICING ON ALL INSTALLATIONS 1521 mm

(59-7/8)

305 mm

(12)

OUTLINE OF CUTOUT 1483 mm x 768 mm (58-3/8 X 30-1/4 )

ON/OFF

SWITCH

229mm

(9)

	CUTOUT IN FLOOR	PUMP
	FOR DRAIN
60mm		(2) AIR VALVES
(2-3/8)	(8) JETS

THANK YOU...

for selecting an American Standard bath. Your new bath is shipped to you after careful inspection. The whirlpool version is completely assembled with pump, motor, and system piping. All you need to finish the installation are your selected fittings and electrical connections for a whirlpool.

To insure maximum performance and pleasure from this product, please follow the instructions and cautions.

List of Optional Components (not included):

•Tile Bead Kit 751755-100*

•Apron Kit*

* see your American Standard Distributor

List of Required Components (not included):

• Drain 1583.470* • Bath Filler* * see your American Standard Distributor

C/L OF DRAIN			C/L OF
			SHOWER ARM
OPTIONAL TO
INISHED FLOOR			C/L OF
SUALLY BETWEEN
1651 & 1981mm			VALVES
(65 & 78)
C/L OF			C/L OF
OVERFLOW		305 mm
38 mm		(12)	SPOUT	■ LEVELING
(1-1/2)
		102 mm		STRINGER
70mm
				NOT FOR
(2-3/4)		(4)
				SUPPORT
502 mm
(19-3/4)				464 mm
ROUGH				(18-1/4)
FLOOR
INTEGRAL		1-1/2 N.P.T.M.
SUPPORT		THREADS	70 mm
FEET	1-1/2 O.D.TAILPIECE		(2-3/4)
			117 mm
			(4-5/8)

GENERAL SPECIFICATIONS FOR 2770 WHIRLPOOL

INSTALLED SIZE					59-7/8 x 31-3/4 x 19-3/4 In.
				(1521mm x 806 mm x 502mm)
WEIGHT								85 Lbs. (39 Kg.)
WEIGHT w/WATER							535 Lbs. (243 Kg.)
GAL. TO OVERFLOW									54 Gal. (204 L.)
MIN. OPERATING GAL.									49 Gal. (186 L.)
BATHING WELL AT SUMP				20 x 40 In. (508mm x 1016mm)
BATHING WELL AT RIM		53-1/2 x 26 In. (1359mm x 699mm)
WATER DEPTH TO OVERFLOW									14 In. (356mm)
FLOOR LOADING			41 Lbs./Sq. Ft. (197 Kgs/Sq. m.)
(PROJECTED AREA)
PTS.											15.6
CUBE (FT3)										29.6
	WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM I PUMP						1.1 HP, 9.9 AMPS, 120V.

List of Required Tools and Supplies:

Tools		Supplies
•	Level	•	Nails
•	Tape Measure	•	Putty
•	Pipe Wrench	•	Caulking (waterproof)
•	Slip Joint Pliers	•	1 x 3 or 2 x 2
•	Screw Driver		Stringers
•	Standard	•	Drop Cloth
	Woodworking Tools	•	15 amp GFI
•	Personal Safety		Outlet
	Equipment	•	Cement, Plaster,
•	Caulking Gun		Grout

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath for any shipping damage. If such damage is found, report it to your vendor immediately.

After inspection and during installation, protect the bath from construction damage. After installation, and before enclosing with wallboard, tile, etc., water test the unit and check for leaks.

If a whirlpool, do not make modifications to the whirlpool system or remove pump from factory mounting. This could adversely affect the safety and performance of the whirlpool and void the warranty. Do not handle or move the whirlpool by the pump, motor, or piping system.

Fittings (bath filler, shower arm, etc.) are not provided with the bath and must be ordered separately. Framing and enclosing materials are provided by others. Check for availability of optional American Standard wall tiling bead (required for recess installations).

Protect all finished surfaces of the whirlpool during construction and installation using a drop cloth.

NOTE: Deck-mounted fittings are not recommended.

WARNING! Do not lift whirlpool by the piping har-

FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902 WEEKDAYS. ness at any time.

© American Standard Inc. 2003

752481-100 Rev. HAll product names listed herein are trademarks of American Standard Inc. unless otherwise noted.