INSTALLATION AND FRAMING INSTRUCTIONS

The variety of installations possible for this whirlpool may require framing procedures other than those shown. Locate studs as required. Ensure roughing-in dimensions are proper, plumb and square. Provisions must be made in all installations for an access opening for servicing the pump and controls. It is strongly recommended that an additional opening be provided for access to the drain components.

NOTE: The apron should not be used as the primary access opening.

1.Position the whirlpool into the installation opening and level the deck, shimming the integral support feet as necessary. Mark the final position of the underside of the deck by tracing a line on to the studs (see Figure 1).

2.Remove the whirlpool and attach a 2 x 4 stringer to the studs, with the top of the stringer touching the traced line.

3.Install drain components to the whirlpool following the manufacturers instructions. Before replacing your whirlpool for final installation, be certain that an opening has been provided in the sub-floor for the drain. See the roughing-in drawing for suggested opening size and location dimensions.

4.Replace whirlpool and re-shim the integral support feet, shimming the entire length of the support feet. Secure the shims using construction adhesive, silicone, mortar or equivalent materials. While not a necessity, the use of a foundation base consisting of cement (e.g. Sakrete), mortar, or grout will help provide a solid and secure installation.

FIG. 1

18-1/4"

(464mm)

SUGGESTED INSTALLATION METHODS

TYPICAL CORNER INSTALLATION

LEVELING SURFACE

WATERPROOF

SEALANT

BATH

SUNKEN OR ISLAND

INSTALLATION

58-1/2"

58-1/2"

(1486mm)

(1486mm)

TILE

WATERPROOF

SEALANT

TILE BEAD

STRIP

 

18-1/4"

 

LEVELING

(464mm)

 

STRINGER

 

 

BATH

HEIGHT OF FRAMEWORK

 

RECESSED INSTALLATION

INCLUDES PLYWOOD,

 

TILES,ETC.

FRONT OR SIDE

 

 

ACCESS PANEL

 

 

REQUIRED FOR

 

SEE CUTOUT TEMPLATE PROVIDED

PUMP SERVICING.

 

 

UNLESS AN ACCESS OPENING OF AT LEAST 12" X 24" (305 X 610MM) IS PROVIDED, WARRANTY SERVICE WILL NOT BE PERFORMED.

752874-100 Rev. C

(2)

Page 2
Image 2
American Standard 2775E SERIES installation instructions Suggested Installation Methods Typical Corner Installation

2775E SERIES specifications

The American Standard 2775E Series is a part of a renowned line of bathroom fixtures designed to enhance the aesthetic and functional aspects of modern bathrooms. This series, known for its exceptional durability and elegant design, caters to a variety of consumer preferences while ensuring comfort and efficiency.

One of the most significant features of the American Standard 2775E Series is its advanced flushing technology. The series includes the EverClean surface, which inhibits the growth of stain and odor-causing bacteria, keeping the toilet bowl cleaner for longer periods. This innovative feature not only ensures a hygienic bathroom environment but also reduces the frequency of cleaning, making it a time-saving option for busy households.

In terms of water efficiency, the 2775E Series adheres to the WaterSense certification standards, promoting sustainability by utilizing significantly less water compared to traditional models. With a powerful flush that consumes just 1.28 gallons per flush, the toilets in this series help conserve water without compromising performance. This commitment to environmental responsibility makes it an attractive choice for eco-conscious consumers looking to reduce their water usage.

Comfort is another defining characteristic of the 2775E Series. Many models feature a taller height design, which is particularly beneficial for adults and seniors, providing ease of use and increased comfort. The elongated bowl design further enhances the seating experience, offering ergonomic benefits that are appreciated by all users.

The aesthetic appeal of the American Standard 2775E Series is matched by its robust construction. Crafted from high-quality vitreous china, these toilets are not only stylish but also built to withstand the rigors of daily use. The smooth, clean lines and sleek finish blend seamlessly into various bathroom styles, from contemporary to traditional.

Installation is straightforward thanks to the universal design of the series. Additionally, the models come with a range of features, including a quiet close toilet seat that prevents slamming, and options for both standard and cabinet height. The easy-to-clean design minimizes nooks and crannies, making maintenance a breeze.

Overall, the American Standard 2775E Series stands out as a top-tier choice in modern bathroom fixtures. With its combination of innovative technologies, user-focused features, and stylish design, it offers an exceptional balance of form and function, setting a high standard for quality and performance in the industry.