www..reelschel matic..com

NOTE: Proper op ration requires the end of the transducer hat has the m unting ears to face towards the bow of the boat.

7.Weight the transducer so that it will not move while the epoxy is curing.

NOTE: When the epoxy cures, no water is necessary inside the hull.

8.If you unplugged the transducer cable at the beginning of this procedure, plug it back into the control head.

NOTE: Neither water, spilled gasoline, nor oil will affect the performance of the transducer.

Trolling Motor Transducer Installation

If you want to install the transducer on a trolling motor, use this procedure. Several styles of the transducer are compatible with trolling motor

mounting. If you have a trolling motor bracket, refer to the separate installation instructions that

are included with the bracket.

NOTE: After trolling motor transducer installation, please perform the final testing and then finalize the installation (see Test and Finish the Transducer Installation).

24

Page 32
Image 32
Humminbird 957C manual Trolling Motor Transducer Installation, Are included with the bracket