Navigation X-Press Menu, Active Side | Humminbird 957C specs

www..reelschel

Navigation X-Press™ Menu

m atic..co m

Navigation X-Press™ Menu

The Navigation X-Press™ Menu provides access to the settings most frequently used. Press the MENU key once while in the Bird's Eye View, the Chart or the Chart/Sonar Combo, Chart/Chart Combo View, or Chart/Bird’s Eye Combo View to access the Navigation X-Press™ Menu.

NOTE: Menu choices will vary depending on system settings, such as whether you are currently navigating.

NOTE: You will have to change Active Side setting to Right to see the Navigation X-Press™ Menu from a Combo View with a sonar side.

Active Side

Active Side allows you to select which side of a Combo View will be active; key presses will only affect the active side of the screen. When a menu is displayed, the non-active side of the screen will be grayed out; at any other time, a green arrow will point to the active side. Combo Views usually display sonar on the left, with charts or Bird’s Eye usually on the right. The Active Side menu choice is only available when a Combo View is active.

To select the Active Side:

1.Highlight Active Side on the Navigation X-Press™ Menu.

2.Use the RIGHT 4-WAY Cursor Control key to change which side is active. (Left, Right, Default = Left).

Split Position

Split Position allows you to adjust what percentage of the screen is taken up by the left side of any Combo View; each view may be adjusted independently; you must be in a specific view to adjust the screen size for that view. The number setting indicates the percentage taken up by the left side of the Combo View; selecting Left sets the left side of the screen to its smallest setting. The Split Position menu choice is only available when a Combo View is active.

To Adjust Split Screen Position

1.Highlight Split Position on the Navigation X-Press™ Menu.

2.Use the RIGHT 4-WAY Cursor Control key to change the size of the left side of a split screen. (Left,30, 40, 50, 60, 70, Right, Default varies)

70

Image 78

Humminbird 957C manual Navigation X-Press Menu, Active Side

Contents

Page Thank You Table of Contents Upper Range Quad Layout Delete All Images Start RecordingDelete Image Delete Recording Navigation Menu Tab Views Menu Tab Page Series Introduction How Sonar Works Peak to Peak measures power output at the highest points DualBeam Plus Sonar How GPS and Cartography Work QuadraBeam Plus SonarUniversal Sonar Purchase for 917c Combo models only GPS uses a constellation of 24 satellites that Software Updates Accessory Bus Installation OverviewMulti-Media Card MMC/SD Slot Control Head Installation Basic installation tasks that you must perform includeInstalling the GPS Receiver if included Gimbal Mounting the Control Head Washer Gimbal Knob Gimbal Bracket Mounting Screws Cables Routed Directly Beneath Mounting Bracket Cables Routed Behind Mounting Bracket Connecting the Control Head Power Cable to the Boat Transducer Installation Transom Transducer Installation Locating the transducer mounting location Preparing the Mounting Location Level Assembling the Transducer and Initial Mounting Knuckle Mounting the Assembly to the Transom Routing the Cable Seam aligned with boat hull Connecting the Cable Screw Test and Finish the Installation Inside the Hull Transducer Installation Correctly, Trial installation Determine the transducer mounting location Route the cable Permanently mount the transducer Trolling Motor Transducer Installation Are included with the bracket GPS Receiver Installation Trolling Motor Transducer OptionsIf you have… Then use Stem Mounting with an Existing 1 14 Thread Stem Follow these steps to stem mount the GPS receiverAbrasion Access Under Mounting Location No Access Under Mounting Location Finish Routing the Cable Check GPS Receiver Operation Testing the System Installation To test the installation Getting Started Using Your 900 Series Powering Up the Control Head What’s On the Sonar Display Triplog Understanding Sonar History Real Time Sonar RTS WindowBottom Presentation POWER/LIGHT Key Key Functions View Key Menu Key View Preset keys WAY Cursor Control KeyExit Key Goto Key Info KeyMark Key Goto Key has multiple functions, depending on the situation Zoom +/- Keys ViewsViews and Readouts Sonar View Sonar View Sonar Zoom View Sonar Zoom View Split Sonar View Split Sonar View Snapshot and Recording View Page Recording Slider Bar Recording Playback Side Beam View Only with QuadraBeam Plus transducer 555 Bird’s Eye View Bird’s Eye View Chart/Bird’s Eye Combo View Chart/Bird’s Eye Combo View Chart/Chart Combo View Chart/Chart Combo View Chart View Chart View with Active Cursor Chart/Sonar Combo View Chart/Sonar Combo View Chart Orientation Viewing Cartography Navigation Waypoints, Routes and Tracks Waypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Save, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved Tracks Man Overboard MOB Navigation MOB Navigation Com Start-Up Options Menu Up Options menuNormal Simulator System Status Simulator Exit Normal operation by powering your 900 Series offNormal Operation System Status Accessory Test Self Test GPS Diagnostic View Sonar X-Press Menu Active Side Split Position Sensitivity Upper Range Lower RangeAdvanced Sonar, Split Sonar Active Sonar Side Views only Chart Speed Quad LayoutWith QuadraBeam Plus Transducer, Side Beam View only Bottom Range Cancel NavigationBottom Lock Sonar Colors Navigation X-Press Menu Cursor to Waypoint Chart or Combo view onlyWaypoint Name Only with an active cursor on a waypoint Save Current Route Save Current TrackClear Current Track Skip Next Waypoint Remove Target Cancel MOB NavigationTo Cancel MOB Navigation Remove Grid Most recently-created waypoint Snapshot and Recording View only Start RecordingStop Recording Optional-purchase MMC/SD Card, Snapshot Recording View only Delete Image Delete All ImagesTo delete an image Delete Recording Delete All Recordings Pings Per Second Playback SpeedTo specify playback speed Stop Playback Sonar Menu Tab Beam Select Fish ID+Transducer will be displayed on the screen Fish ID Sensitivity Bottom View Zoom Width To change the 455 kHz Sensitivity setting KHz SensitivityOptional-purchase for Depth Lines Surface ClutterAdvanced Noise Filter Max Depth Water Type Transducer SelectColor Bar Temperature Graph Sonar View only, with Temperature inputNavigation Menu Tab Current Track Saved Tracks Waypoints RoutesWaypoints Submenu contains the following menu choices North Reference Trolling Grid Rotation Trackpoint IntervalTrack Min Distance Course Projection Line Track Color RangeMap Datum Export All Nav Data Continuous Navigation Mode allows you to Continuous Navigation ModeChart Menu Tab Delete All Nav Data Chart Detail Level Map Borders Navaids on Birds Eye View Lat/Lon GridSpot Soundings Shaded Depth Set Simulation Position Set Map Offset Alarms Menu Tab Clear Map Offset Depth Alarm Fish ID AlarmLow Battery Alarm Aux Temp Alarm Temp Alarm Arrival Alarm Off Course Alarm Drift Alarm Alarm Tone Units Temp Setup Menu TabUnits Depth International only Units Speed User ModeUnits Distance Language Off Triplog Position Voltage Aux. Temperature Triplog ResetRestore Defaults Select ReadoutsPage Depth Offset Aux Temp OffsetTemp Offset Daylight Saving Time Speed CalibrationLocal Time Zone Position Format Time Format Date FormatAdvanced, International only Digits Format Nmea Output Views Menu Tab Following views are available Accessories Menu Tab Using Screen Snapshot To turn Screen Snapshot on or off Troubleshooting Series Doesn’t Power Up Display Problems Control head loses power at high speeds Finding the Cause of Noise Year Limited Warranty Humminbird Service Policy Returning Your Unit for Service Series Accessories Series includePage Specifications Glossary 123 Com Atic Receiver See Transmitter Com Atic Sonar Terms Glossary GPS & Navigation Terms 129 Glossary GPS & Navigation Terms Glossary GPS & Navigation Terms Glossary GPS & Navigation Terms Contact Humminbird