American Standard 2783.012 dimensions Cadet Specifier Round Front Toilet, Bowl 4392.001SMT Tank

CADET™ SPECIFIER ROUND FRONT TOILET

❏2783.012

•Vitreous china

•Low-consumption (6.0 Lpf/1.6 gpf)

•Round front siphon action jetted bowl

•Fully glazed 2” Ballpass trapway

•Fluidmaster Fill Valve

•Large 11” x 9” water surface area

•Close-coupled tank

•Color-matched trip lever

•Sanitary bar on bowl

•2 bolt caps

•100% factory flush tested

❏3454.016 Bowl

❏4392.001SMT Tank

Nominal Dimensions: 699 x 508 x 737mm (27-1/2" x 20" x 29")

Fixture only, seat and supply by others

CADET™ SPECIFIER ROUND FRONT TOILET

VITREOUS CHINA

Alternate Tank Configurations Available:

❏4392.800SMT Tank complete with Trip Lever Located on Right Side

To Be Specified

❏Color:

❏Seat: American Standard #5322.011 "Rise and Shine" (with easy to clean lift-off hinge system) solid plastic closed front seat with cover.

See pageTB-001.

❏Seat: American Standard #5308.014 "Laurel" molded closed front seat with cover.

See pageTB-001.

❏Alternate Seat:

❏Supply with stop:

Compliance Certifications -

Meets or Exceeds the Following Specifications:

FINISHED WALL

699mm (27-1/2)

25mm ± 6mm (1 ± 1/4)

232mm (9-1/8)

	419mm
	(16-1/2)
	C/L OF SEAT POST HOLES
	140mm (5-1/2 CENTERS)
76mm 1/4)-(3		381mm
		(15)
	16mm
	(5/8)	FINISHED
178mm	305mm	FLOOR
(7)	(12)
305mm	C/L OF OUTLET
(12)

508mm

(20)

C/L

737mm

SUPPLY(29) AS

REQ'D

		381mm
*222mm(8-3/4)
	(15)

152mm

(6)

241mm

(9-1/2)

•ASME A112.19.2M (and 19.6M) for Vitreous China Fixtures - includes Flush Performance, Ball Pass Diameter, Trap Seal Depth and all Dimensions

NOTES:

THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance established by ANSI Standard A112.19.2

These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.

Revised 5/04 © 2004 American Standard Inc.