On Spanning Tree→STP Config→STP Config | TP-Link TL-SG2008 manual

¾Configuration Procedure

zConfigure Switch A:

Step	Operation		Description

1	Configure ports		On VLAN→802.1Q VLAN page, configure the link
			type of the related ports as Tagged, and add the ports
			to VLAN101-VLAN106. The detailed instructions can
			be found in the section 802.1Q VLAN.

2	Enable STP function		On Spanning Tree→STP Config→STP Config page,
			enable STP function and select MSTP version.
			On Spanning Tree→STP Config→Port Config page,
			enable MSTP function for the port.

3	Configure the region name and		On Spanning Tree→MSTP Instance→Region
	the revision of MST region		Config page, configure the region as TP-LINK and
			keep the default revision setting.

4	Configure	VLAN-to-Instance	On Spanning Tree→MSTP Instance→Instance
	mapping table of the MST region		Config page, configure VLAN-to-Instance mapping
			table. Map VLAN 101, 103 and 105 to Instance 1; map
			VLAN 102, 104 and 106 to Instance 2.

z Configure Switch B:

Step	Operation		Description

1	Configure ports		On VLAN→802.1Q VLAN page, configure the link
			type of the related ports as Tagged, and add the ports
			to VLAN101-VLAN106. The detailed instructions can
			be found in the section 802.1Q VLAN.

2	Enable STP function		On Spanning Tree→STP Config→STP Config page,
			enable STP function and select MSTP version.
			On Spanning Tree→STP Config→Port Config page,
			enable MSTP function for the port.

3	Configure the region name and		On Spanning Tree→MSTP Instance→Region
	the revision of MST region		Config page, configure the region as TP-LINK and
			keep the default revision setting.

4	Configure	VLAN-to-Instance	On Spanning Tree→MSTP Instance→Instance
	mapping table of the MST region		Config page, configure VLAN-to-Instance mapping
			table. Map VLAN 101, 103 and 105 to Instance 1; map
			VLAN 102, 104 and 106 to Instance 2.

5	Configure switch B as the root		On Spanning Tree→MSTP Instance→Instance
	bridge of Instance 1		Config page, configure the priority of Instance 1 to be
			0.

6	Configure switch B as the		On Spanning Tree→MSTP Instance→Instance
	designated bridge of Instance 2		Config page, configure the priority of Instance 2 to be
			4096.

73

Image 80

TP-Link TL-SG2008 On Spanning Tree→STP Config→STP Config, On Spanning Tree→MSTP Instance→Region, Operation Description

Contents

TL-SG2008 REV1.0.0 1910010984 Copyright & Trademarks FCC Statement Safety Information Contents Loopback Detection 100 Rmon Package Contents About this Guide Intended ReadersConventions Overview of This Guide Chapter Introduction System Appendix a Specifications Overview of the Switch Main FeaturesIntroduction Appearance Description Rear Panel ¾ LEDs Name Status Indication Configuration Login to the SwitchLogin Return to Contents System System InfoSystem Summary ¾ Port Status Device Description ¾ Port InfoStatus Displays the connection status of the port ¾ Bandwidth Utilization ¾ Time Info System Time¾ Device Description Daylight Saving Time System IP System IP Following entries are displayed on this screen User Table ¾ IP ConfigUser Management User Config Password Type in a password for users’ login¾ User Info User Status Config Restore Confirm Password Password Display ModeUser ID, Name, Access Level and status Operation System Tools ¾ Config Backup Config BackupFirmware Upgrade System Reboot System Reset Access Security Access Control SSL Config IP Address & MaskMAC Address Port ¾ Global Config ¾ Certificate Download¾ Key Download Key File SSH Config Select Enable/Disable SSH function ¾ Network Requirements ¾ Configuration ProcedureDownload Application Example 2 for SSH Page Page Return to Contents Port SwitchingPort Config Port Mirror GroupMirroring Mode Egress NumberIngress Port Security ¾ Port Security Port Isolation Port Isolation ¾ Port Isolation Config Loopback Detection¾ Port Isolation List Forward Portlist Display the forwardlist Operation Mode LAG LAG Table ¾ LAG Table Member Static LAGGroup Number Lacp Config LAG will delete this LAG Port Priority ¾ Lacp ConfigAdmin Key Traffic Monitor Traffic SummaryPackets Rx Packets Tx Traffic Statistics Refresh Rate¾ Statistics Received MAC Address Bound MAC addressWay Port Address Table ¾ Search Option MAC Address Displays the MAC address learned by the switch Static Address¾ Address Table Displays the corresponding Vlan ID of the MAC address Dynamic Address ¾ Static Address Table Bind ¾ Aging Config¾ Dynamic Address Table Filtering Address ¾ Create Filtering Address ¾ Dhcp Working Principle Dhcp Filtering¾ Filtering Address Table 17 Network diagram of Dhcp 19 Dhcp Cheating Attack Implementation Procedure ¾ Dhcp Cheating Attack ¾ Trusted Port ¾ Dhcp FilteringDhcp Filtering Vlan 802.1Q Vlan ¾ Link Types of ports Vlan Config ¾ Pvid Give a name to the Vlan for identification NameUntagged Ports Tagged Ports ¾ Network Diagram Application Example for 802.1Q VlanUntagged Tagged Step Operation Description Required. On VLAN→802.1Q VLAN→VLAN Config page, configureRequired. On VLAN→802.1Q VLAN→VLAN Config page, create a Spanning Tree ¾ STP Elements ¾ STP Generation ¾ STP Timers¾ Bpdu Comparing Principle in STP mode Step Operation Tips ： ¾ Rstp Elements ¾ Mstp Elements ¾ Port States ¾ Port Roles STP Config STP Config Forward Delay VersionHello Time Max Age Port Config STP Summary Priority ExtPathIntPath Edge Port Region Config Instance Config¾ Region Config Mstp Instance ¾ Instance Table InstanceClear ¾ VLAN-Instance Mapping Path Cost Instance Port ConfigInstance ID STP Security Port Protect ¾ Root Protect ¾ TC Protect¾ Bpdu Protect ¾ Bpdu Filter TC Protect Application Example for STP Function 11 TC Protect On Spanning Tree→STP Config→STP Config On Spanning Tree→MSTP Instance→RegionOn Spanning Tree→MSTP Instance→Instance Operation Description On Spanning Tree→STP Config→Port Config ¾ Suggestion for Configuration Multicast ¾ Multicast Overview ¾ Multicast Address ¾ Multicast Address Table Igmp Snooping Multicast IP Port¾ Igmp Snooping ¾ Igmp Snooping Process Snooping Config ¾ Igmp Snooping Fundamentals ¾ Igmp Snooping Status Description Displays Igmp Snooping status Member Igmp Snooping Fast Leave Multicast Vlan ¾ Multicast Vlan Multicast→IGMP Snooping→Multicast Vlan On the Multicast→IGMP Snooping→Snooping ConfigVlan Snooping→Port Config Snooping→Snooping ConfigMulticast IP Multicast IP Table Static Multicast IP ¾ Static Multicast IP Table Multicast Filter¾ Create Static Multicast IP-Range Port Filter ¾ Port Filter Config Action ModeFilter Bound IP-Range ID Port Displays the port number of the switch Query Packet Packet StatisticsMulticast→Multicast Filter→IP-Range Multicast→Multicast Filter→Port Filter Return to Contents ¾ QoS ¾ Priority ModeQoS ¾ Schedule Mode 802.1Q frame SP-Mode ¾ Port Priority Config DiffServPort Priority Displays the LAG number which the port belongs to ¾ 802.1P Priority Config 2 802.1P/CoS MappingRequired. On QoS→DiffServ→Port Priority ¾ Priority Level Configuration Procedure Step Operation Description ¾ Dscp Priority ConfigDscp Priority Mapping Schedule Mode ¾ Priority LevelIt ranges from 0 to Priority Level Rate Limit ¾ Rate Limit ConfigBandwidth Control Egress Ratebps Storm ControlIngress Rate bps Voice Vlan Broadcast RateBps Mulitcast Rate ¾ Port Voice Vlan Mode Packet Type Processing Mode Global Config¾ Security Mode of Voice Vlan Port Mode Enter the Vlan ID of the voice VlanAging Time OUI address is aging out OUI Config Required. On VLAN→802.1Q VLAN→VLAN Config Optional. On QoS→Voice VLAN→OUI Config page, youRequired. On QoS→Voice VLAN→Port Config Required. On QoS→Voice VLAN→Global Config ACL Config ACLACL Summary ACL Create MAC ACL ¾ Create ACL¾ Create MAC ACL Rule ID Standard-IP ACL Extend-IP ACL¾ Create Standard-IP ACL Mask Policy Config Policy Summary¾ Create Extend-IP ACL IP Protocol Policy Create Action CreateIndex Displays the index of the policy Displays the ID of the ACL contained in the policy Policy Binding Binding Table¾ Create Action ¾ Policy Bind Table Port Binding Vlan BindingInterface Direction Displays the binding direction ¾ VLAN-Bind Config Application Example for ACLEnter the ID of the Vlan you want to bind ¾ VLAN-Bind Table On ACL→ACL Config→ACL Create page, create ACL On ACL→ACL Config→Standard-IP ACL page, select ACL Limit2 Snmp ¾ Snmp Overview¾ Snmp Management Frame ¾ Snmp Versions ¾ Snmp Configuration Outline ¾ MIB Introduction Snmp Config Snmp Config, Notification and Rmon Snmp View Snmp GroupMIB Object ID View Type ¾ Group Config Snmp Group Following entries are displayed on this screen Snmp User ¾ Group Table Auth Mode Auth PasswordPrivacy Mode Privacy Password Access Snmp CommunityCommunity Name MIB View Required. On the SNMP→SNMP Config→Global Required. On the SNMP→SNMP Config→SNMPConfig→Global Config page, enable Snmp On the SNMP→SNMP Config→SNMP Notification ¾ Create NotificationIP Address UDP Port Timeout RmonRetry ¾ Notification Table ¾ History Control Table History ControlRmon Group Function ¾ Event Table Event ConfigAlarm Config Variable Sample TypeRising Threshold Rising Event 131 CPU Monitor MaintenanceSystem Monitor Level Description 12.2 LogMemory Monitor Log Table Level Description Debugging¾ Log Info Time ¾ Local Log Config Local LogLog Buffer Log File Backup Log Remote Log¾ Log Host Host IP Device Diagnostics ¾ Backup LogCable Test ¾ Cable Test Network Diagnostics Loopback Tracert ¾ Ping ConfigPing ¾ Tracert Config 10 Tracert Following entries are displayed on this screen Appendix a Specifications Appendix B Configuring the PCs Configure TCP/IP component Now Appendix C Glossary Multicast Switching Remote Authentication Dial-in User Service RadiusIgmp Snooping Igmp Query Rapid Spanning Tree Protocol Rstp Simple Network Management Protocol SnmpSimple Network Time Protocol Sntp Spanning Tree Algorithm STA