RMON Group

Function

 

 

History Group

After a history group is configured, the switch collects and records network

 

statistics information periodically, based on which the management station

 

can monitor network effectively.

 

 

Event Group

Event Group is used to define RMON events. Alarms occur when an event is

 

detected.

 

 

Statistic Group

Statistic Group is set to monitor the statistic of alarm variables on the specific

 

ports.

 

 

Alarm Group

Alarm Group is configured to monitor the specific alarm variables. When the

 

value of a monitored variable exceeds the threshold, an alarm event is

 

generated, which triggers the switch to act in the set way.

 

 

The RMON Groups can be configured on the History Control, Event Config and Alarm Config pages.

11.3.1 History Control

On this page, you can configure the History Group for RMON.

Choose the menu SNMP→RMON→History Control to load the following page.

Figure 11-9 History Control

The following entries are displayed on this screen:

¾History Control Table

Select:

Select the desired entry for configuration.

Index:

Displays the index number of the entry.

Port:

Specify the port from which the history samples were taken.

Interval:

Specify the interval to take samplings from the port.

Owner:

Enter the name of the device or user that defined the entry.

Status:

Select Enable/Disable the corresponding sampling entry.

 

128

Page 135
Image 135
TP-Link TL-SG2008 manual Rmon Group Function, ¾ History Control Table