Figure 5-10 LACP Config

The following entries are displayed on this screen:

¾Global Config

System Priority: Specify the system priority for the switch. The system priority and

MAC address constitute the system identification (ID). A lower system priority value indicates a higher system priority. When exchanging information between systems, the system with higher priority determines which link aggregation a link belongs to, and the system with lower priority adds the proper links to the link aggregation according to the selection of its partner.

¾LACP Config

Port Select: Click the Select button to quick-select the corresponding port based

on the port number you entered.

Select:

Select the desired port for LACP configuration. It is multi-optional.

Port:

Displays the port number.

Admin Key:

Specify an admin key for the port. The member ports in a dynamic

 

aggregation group must have the same admin key.

Port Priority:

Specify a Port Priority for the port. This value determines the priority

 

of the port to be selected as the dynamic aggregation group

 

member. The port with smaller Port Priority will be considered as the

 

preferred one. If the two port priorities are equal; the port with

 

smaller port number is preferred.

Mode:

Specify LACP mode for your selected port.

Status:

Enable/Disable the LACP feature for your selected port.

 

38

Page 45
Image 45
TP-Link TL-SG2008 manual ¾ Lacp Config, Admin Key, Port Priority