On Spanning Tree→STP Config→Port Config | TP-Link TL-SG2008 instruction

zConfigure Switch C:

Step	Operation		Description

1	Configure ports		On VLAN→802.1Q VLAN page, configure the link
			type of the related ports as Tagged, and add the ports
			to VLAN101-VLAN106. The detailed instructions can
			be found in the section 802.1Q VLAN.

2	Enable STP function		On Spanning Tree→STP Config→STP Config
			page, enable STP function and select MSTP version.
			On Spanning Tree→STP Config→Port Config
			page, enable MSTP function for the port.

3	Configure the region name and		On Spanning Tree→MSTP Instance→Region
	the revision of MST region		Config page, configure the region as TP-LINK and
			keep the default revision setting.

4	Configure	VLAN-to-Instance	On Spanning Tree→MSTP Instance→Instance
	mapping table of the MST region		Config page, configure VLAN-to-Instance mapping
			table. Map VLAN101, 103 and 105 to Instance 1; map
			VLAN102, 104 and 106 to Instance 2.

5	Configure switch C as the root		On Spanning Tree→MSTP Instance→Instance
	bridge of Instance 1		Config page, configure the priority of Instance 1 to be
			4096.

6	Configure switch C as the root		On Spanning Tree→MSTP Instance→Instance
	bridge of Instance 2		Config page, configure the priority of Instance 2 to be
			0.

z Configure Switch D:

Step	Operation		Description

1	Configure ports		On VLAN→802.1Q VLAN page, configure the link
			type of the related ports as Tagged, and add the ports
			to VLAN101-VLAN106. The detailed instructions can
			be found in the section 802.1Q VLAN.

2	Enable STP function		On Spanning Tree→STP Config→STP Config
			page, enable STP function and select MSTP version.
			On Spanning Tree→STP Config→Port Config
			page, enable MSTP function for the port.

3	Configure the region name and		On Spanning Tree→MSTP Instance→Region
	the revision of MST region		Config page, configure the region as TP-LINK and
			keep the default revision setting.

4	Configure	VLAN-to-Instance	On Spanning Tree→MSTP Instance→Instance
	mapping table of the MST region		Config page, configure VLAN-to-Instance mapping
			table. Map VLAN101, 103 and 105 to Instance 1; map
			VLAN102, 104 and 106 to Instance 2.

zThe configuration procedure for switch E and F is the same with that for switch D.

74

Image 81

TP-Link TL-SG2008 manual On Spanning Tree→STP Config→Port Config

Contents

REV1.0.0 1910010984 TL-SG2008 Copyright & Trademarks FCC Statement Safety Information Contents Loopback Detection 100 Rmon Package Contents Intended Readers About this GuideConventions Overview of This Guide System Chapter Introduction Appendix a Specifications Main Features Overview of the SwitchIntroduction Appearance Description ¾ LEDs Name Status Indication Rear Panel Login to the Switch LoginConfiguration Return to Contents System Info SystemSystem Summary ¾ Port Status ¾ Port Info Device DescriptionStatus Displays the connection status of the port ¾ Bandwidth Utilization System Time ¾ Device Description¾ Time Info Daylight Saving Time System IP Following entries are displayed on this screen System IP ¾ IP Config User ManagementUser Table Password Type in a password for users’ login User Config¾ User Info User Status Confirm Password Password Display Mode Config RestoreUser ID, Name, Access Level and status Operation System Tools Config Backup Firmware Upgrade¾ Config Backup System Reset System Reboot Access Control Access Security IP Address & Mask SSL ConfigMAC Address Port ¾ Certificate Download ¾ Global Config¾ Key Download Key File Select Enable/Disable SSH function SSH Config ¾ Configuration Procedure Download¾ Network Requirements Application Example 2 for SSH Page Page Return to Contents Switching Port ConfigPort Group Port MirrorMirroring Mode Number IngressEgress ¾ Port Security Port Security Port Isolation Port Isolation Loopback Detection ¾ Port Isolation Config¾ Port Isolation List Forward Portlist Display the forwardlist LAG Operation Mode ¾ LAG Table LAG Table Static LAG Group NumberMember LAG will delete this LAG Lacp Config ¾ Lacp Config Admin KeyPort Priority Traffic Summary Traffic MonitorPackets Rx Packets Tx Refresh Rate Traffic Statistics¾ Statistics Received Bound MAC address MAC AddressWay Port ¾ Search Option Address Table Static Address MAC Address Displays the MAC address learned by the switch¾ Address Table Displays the corresponding Vlan ID of the MAC address ¾ Static Address Table Dynamic Address ¾ Aging Config ¾ Dynamic Address TableBind ¾ Create Filtering Address Filtering Address Dhcp Filtering ¾ Filtering Address Table¾ Dhcp Working Principle 17 Network diagram of Dhcp ¾ Dhcp Cheating Attack 19 Dhcp Cheating Attack Implementation Procedure ¾ Dhcp Filtering Dhcp Filtering¾ Trusted Port Vlan ¾ Link Types of ports 802.1Q Vlan ¾ Pvid Vlan Config Name Give a name to the Vlan for identificationUntagged Ports Tagged Ports Application Example for 802.1Q Vlan ¾ Network DiagramUntagged Tagged Required. On VLAN→802.1Q VLAN→VLAN Config page, configure Required. On VLAN→802.1Q VLAN→VLAN Config page, create aStep Operation Description ¾ STP Elements Spanning Tree ¾ STP Timers ¾ Bpdu Comparing Principle in STP mode¾ STP Generation Tips ： Step Operation ¾ Mstp Elements ¾ Rstp Elements ¾ Port Roles ¾ Port States STP Config STP Config Version Forward DelayHello Time Max Age STP Summary Port Config ExtPath PriorityIntPath Edge Port Instance Config Region Config¾ Region Config Mstp Instance Instance ¾ Instance TableClear ¾ VLAN-Instance Mapping Instance Port Config Instance IDPath Cost Port Protect STP Security ¾ TC Protect ¾ Root Protect¾ Bpdu Protect ¾ Bpdu Filter TC Protect 11 TC Protect Application Example for STP Function On Spanning Tree→MSTP Instance→Region On Spanning Tree→STP Config→STP ConfigOn Spanning Tree→MSTP Instance→Instance Operation Description On Spanning Tree→STP Config→Port Config ¾ Suggestion for Configuration ¾ Multicast Overview Multicast ¾ Multicast Address Table ¾ Multicast Address Multicast IP Port Igmp Snooping¾ Igmp Snooping ¾ Igmp Snooping Process ¾ Igmp Snooping Fundamentals Snooping Config Description Displays Igmp Snooping status Member ¾ Igmp Snooping Status Fast Leave Igmp Snooping Multicast Vlan ¾ Multicast Vlan On the Multicast→IGMP Snooping→Snooping Config VlanMulticast→IGMP Snooping→Multicast Vlan Snooping→Snooping Config Snooping→Port ConfigMulticast IP Multicast IP Table Static Multicast IP Multicast Filter ¾ Create Static Multicast¾ Static Multicast IP Table Port Filter IP-Range Action Mode ¾ Port Filter ConfigFilter Bound IP-Range ID Packet Statistics Port Displays the port number of the switch Query PacketMulticast→Multicast Filter→IP-Range Multicast→Multicast Filter→Port Filter Return to Contents ¾ Priority Mode QoS¾ QoS 802.1Q frame ¾ Schedule Mode SP-Mode DiffServ ¾ Port Priority ConfigPort Priority Displays the LAG number which the port belongs to 2 802.1P/CoS Mapping ¾ 802.1P Priority ConfigRequired. On QoS→DiffServ→Port Priority ¾ Priority Level ¾ Dscp Priority Config Configuration Procedure Step Operation DescriptionDscp Priority Mapping ¾ Priority Level Schedule ModeIt ranges from 0 to Priority Level ¾ Rate Limit Config Bandwidth ControlRate Limit Storm Control Ingress Rate bpsEgress Ratebps Broadcast Rate Voice VlanBps Mulitcast Rate ¾ Port Voice Vlan Mode Global Config ¾ Security Mode of Voice VlanPacket Type Processing Mode Enter the Vlan ID of the voice Vlan Port ModeAging Time OUI address is aging out OUI Config Optional. On QoS→Voice VLAN→OUI Config page, you Required. On VLAN→802.1Q VLAN→VLAN ConfigRequired. On QoS→Voice VLAN→Port Config Required. On QoS→Voice VLAN→Global Config ACL ACL ConfigACL Summary ACL Create ¾ Create ACL MAC ACL¾ Create MAC ACL Rule ID Extend-IP ACL Standard-IP ACL¾ Create Standard-IP ACL Mask Policy Summary Policy Config¾ Create Extend-IP ACL IP Protocol Action Create Policy CreateIndex Displays the index of the policy Displays the ID of the ACL contained in the policy Binding Table Policy Binding¾ Create Action ¾ Policy Bind Table Vlan Binding Port BindingInterface Direction Displays the binding direction Application Example for ACL ¾ VLAN-Bind ConfigEnter the ID of the Vlan you want to bind ¾ VLAN-Bind Table On ACL→ACL Config→Standard-IP ACL page, select ACL On ACL→ACL Config→ACL Create page, create ACL Limit2 ¾ Snmp Overview Snmp¾ Snmp Management Frame ¾ Snmp Versions ¾ MIB Introduction ¾ Snmp Configuration Outline Snmp Config, Notification and Rmon Snmp Config Snmp Group Snmp ViewMIB Object ID View Type Snmp Group Following entries are displayed on this screen ¾ Group Config ¾ Group Table Snmp User Auth Password Auth ModePrivacy Mode Privacy Password Snmp Community AccessCommunity Name MIB View Required. On the SNMP→SNMP Config→SNMP Required. On the SNMP→SNMP Config→GlobalConfig→Global Config page, enable Snmp On the SNMP→SNMP Config→SNMP ¾ Create Notification NotificationIP Address UDP Port Rmon TimeoutRetry ¾ Notification Table History Control Rmon Group Function¾ History Control Table Event Config Alarm Config¾ Event Table Sample Type VariableRising Threshold Rising Event 131 Maintenance System MonitorCPU Monitor 12.2 Log Memory MonitorLevel Description Level Description Debugging Log Table¾ Log Info Time Local Log ¾ Local Log ConfigLog Buffer Log File Remote Log Backup Log¾ Log Host Host IP ¾ Backup Log Device DiagnosticsCable Test ¾ Cable Test Loopback Network Diagnostics ¾ Ping Config PingTracert 10 Tracert Following entries are displayed on this screen ¾ Tracert Config Appendix a Specifications Configure TCP/IP component Appendix B Configuring the PCs Now Appendix C Glossary Remote Authentication Dial-in User Service Radius Multicast SwitchingIgmp Snooping Igmp Query Simple Network Management Protocol Snmp Rapid Spanning Tree Protocol RstpSimple Network Time Protocol Sntp Spanning Tree Algorithm STA