Note:

1.It will take a few minutes to restore the configuration. Please wait without any operation.

2.To avoid any damage, please don’t power down the switch while being restored.

3.After being restored, the current settings of the switch will be lost. Wrong uploaded configuration file may cause the switch unmanaged.

4.3.2 Config Backup

On this page you can download the current configuration and save it as a file to your computer for your future configuration restore.

Choose the menu System→System Tools→Config Backup to load the following page.

Figure 4-11 Config Backup

The following entries are displayed on this screen:

¾Config Backup

Backup Config: Click the Backup Config button to save the current configuration

as a file to your computer. You are suggested to take this measure before upgrading.

Note:

It will take a few minutes to backup the configuration. Please wait without any operation.

4.3.3 Firmware Upgrade

The switch system can be upgraded via the Web management page. To upgrade the system is to get more functions and better performance. Go to http://www.tp-link.com to download the updated firmware.

Choose the menu System→System Tools→Firmware Upgrade to load the following page.

17

Page 24
Image 24
TP-Link TL-SG2008 manual Firmware Upgrade, ¾ Config Backup