SpeedConnect™ Drain

Troubleshooting Guide

If sink does not hold water even though Stopper is in the “down” position:

• Follow CABLE ADJUSTMENT PROCEDURE.

If Stopper does not raise up fully or sink drains too slowly:

• Follow CABLE ADJUSTMENT PROCEDURE.

If you need to remove the Stopper:

• Follow STOPPER REMOVAL PROCEDURE.

If you would like the ability to remove your Stopper simply by lifting it out of the drain:

•Follow STOPPER INSTALLATION PROCEDURE for “Unlocked” mode.

CABLE ADJUSTMENT PROCEDURE

Disconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A.

Look at the area on the Drain Body where the Cable was attached and locate the component labeled as “Cam” in the illustration. Fig. B.

Use a small screwdriver to rotate the Cam in the clockwise direction as far as it will go. At this point the Stopper should be in the UP position. Fig. B, C.

Push DOWN on the Lift-Knob to make sure it is fully down. Fig. C.

Re-attach the Cable to the Drain Body Connection (2) by threading the Cable Connector (1) clockwise onto the Drain Body Connection (2) and hand-tighten. Fig. A.

Fig. A.

1

RE-ATTACH

DISCONNECT

2

Fig. B.

Fig. C.

DOWN

 

 

CAM

 

 

 

 

1

CAM CAP

 

 

STOPPER REMOVAL PROCEDURE

Disconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A.

Look at the area on the Drain Body where the Cable was attached and locate the component labeled as “Cam” and “Cam Cap” in the illustration. Fig. B.

Use fingers or small screwdriver under either side of the Cam Cap to pry it out from the Drain. Fig. D. Remove the Cam by pulling it straight out while wiggling gently to loosen the Rubber Seal. Fig. E.

The Stopper can now be removed by lifting it out of the Drain. Fig. F.

Fig. D.

Fig. E.

REMOVE

Fig. F.

 

 

CAM

 

 

REMOVE

 

 

 

CAM CAP

 

 

 

 

 

M968795 Rev. 1 . 1

 

 

5

 

Page 4 Page 6
Page 5
Image 5
American Standard 3475.500, 3475.300 installation instructions SpeedConnect Drain
Page 4 Page 6

3475.500, 3475.300 specifications

The American Standard 3475.500 and 3475.300 represent a significant leap in bathroom comfort and functionality, catering to the evolving needs of modern consumers. Both models are part of a broader commitment by American Standard to deliver high-quality fixtures that balance utility, design, and sustainability.

One of the standout features of the American Standard 3475.500 and 3475.300 is their innovative design. These models possess a sleek, contemporary aesthetic that seamlessly blends with a variety of bathroom decors. The smooth lines and minimalist profile provide an elegant touch, making them suitable for both traditional and modern settings. The availability of different color finishes allows consumers to choose the style that best fits their personal taste and bathroom theme.

Both the 3475.500 and 3475.300 are equipped with cutting-edge technologies that enhance user experience. For instance, the models utilize EverClean technology, which inhibits the growth of stain and odor-causing bacteria, mold, and mildew, ensuring that the surfaces remain clean and hygienic with minimal effort. This feature is particularly valuable for those looking to maintain a neat and sanitary environment in their bathrooms.

Water efficiency is another critical characteristic of these American Standard models. They comply with WaterSense standards, using significantly less water without sacrificing performance. The efficient design not only supports environmental sustainability but also helps homeowners save on their water bills over time.

In terms of comfort, both models offer ergonomic designs that enhance user experience. The bowl height is optimized for comfort, making it accessible to individuals of all ages and abilities. This thoughtful design is complemented by the models’ Quiet-Close toilet seats that prevent slamming, ensuring a peaceful bathroom environment.

Durability is a hallmark of American Standard products, and the 3475.500 and 3475.300 are no exception. Constructed from high-quality materials, these toilets are designed to withstand the rigors of daily use while maintaining their aesthetic appeal.

In summary, the American Standard 3475.500 and 3475.300 combine exceptional design, advanced technologies, and eco-friendly features to redefine the bathroom experience. Their fusion of style, comfort, and efficiency makes them an excellent choice for homeowners looking to upgrade their bathrooms with reliable and sophisticated fixtures.
Top Page Image Contents