American Standard 3821.644 Series Make Water Supply Connections, Install Spray Holder

2 MAKE WATER SUPPLY CONNECTIONS

NOTE: FLEXIBLE SUPPLIES HAVE TO BE PURCHASED SEPARATELY

Carefully bend COPPER SUPPLIES to meet water supply lines using the palms of the hands to avoid kinking.

Connect HOT water supply line to left tube, and COLD water supply line to right tube using appropriate connectors.

Use 1/2" IPS FLEXIBLE SUPPLIES (3) or 3/8" O.D. BULL-NOSE RISERS (4). Use adjustable wrench to tighten connections. Do not over tighten. Be careful not to kink copper supply when bending. Use tubing cutter to cut to proper length.

COPPER SUPPLIES TUBES

34

FERRULE

HOT

COLD

3 INSTALL SPRAY HOLDER

On model with separate spray, place the SPRAY HOLDER (1) into the appropriate mounting hole. Assemble the SPRAY HOLDER WING NUT (2) onto the shank of SPRAY HOLDER (1) from below and tighten. Do not use putty.

On model with spray through the ESCUTCHEON (3), place SPRAY HOLDER (4) into the hole of ESCUTCHEON (3). Assemble SPRAY HOLDER NUT (5) onto the shank of SPRAY HOLDER (4) from below and tighten. Do not use putty.

For installation less spray cap off SPRAY HOSE CONNECTION with PIPE CAP (6).

SPRAY HOSE

CONNECTION

43

56

4 CONNECT HOSE SPRAY

Feed SPRAY HOSE (1) through SPRAY HOLDER (2) and attach COUPLING NUT (3) of HOSE (1) to HOSE ADAPTOR (4) on valve body. Tighten COUPLING NUT (3) firmly.

1

2

1

2

4

3

M 9 6 8 1 8 8 E