Dynacord Xa2600 manual PM2600 Dual Active 2-Way, ”PowerMax“ Controlled Amplifier 2600 Watts

PM2600

PM2600

Dual Active 2-Way

”PowerMax“ Controlled Amplifier

2600 Watts

Basically, the PM2600 can drive any active 2-way system that consists of full-range cabinets and sub woofers. The integrated frequency crossover operates in PowerMax function mode and has been optimised for those com- binations. Intelligently configuring system components leads to outstanding results. For more details, please refer to the PowerMax Systems and PowerMax230 Controller descriptions.

Crossover Section	Xa2600	PM2600
Crossover Type	3rd Order BU, Constant-Power-Response	PowerMax12*, Stereo active 2-way
	Stereo active 2-way
Crossover Frequency	160 Hz	110 Hz
Lo-Cut	12dB/octave, 30Hz at -3dB ref. 1kHz	12dB/octave, 25Hz at -3dB ref. 1kHz
*Patent pending

	Xa2600, PM2600
	HI-Channels		LO-Channels
Load Impedance	8Ω	4Ω	8Ω	4Ω
Maximum Midband Output Power, THD = 1%, 1kHz, 60Hz	380W	700W	380W	700W
Rated Output Power, THD < 0.1%	300W	600W	350W	700W
Maximum Single Channel Output Power,	400W	750W	400W	750W
Dynamic-Headroom, IHF-A
Maximum RMS Voltage Swing, THD = 1%		58.7V
Frequency Response, -3dB, ref. 1kHz, Lo-Cut		25Hz ... 45kHz
Minimum Load Impedance		2.5 Ω
Input Sensitivity at rated output power @ 4Ω		0dBu (775mV)
Maximum Input Level		+21dBu (8.7V)
THD at rated output power, MBW =80kHz		< 0.05%
Crosstalk Attenuation		> 60dB
Slew Rate		30V/µs
Power Bandwith, THD = 1%, ref. 1kHz, half power @ 4Ω		10Hz ... 50kHz
Input Impedance, 20Hz ... 20kHz, balanced		20kΩ
Damping Factor		> 300
Signal-to-Noise Ratio, A-weighted		> 100dB
Power Requirements		230V, 50Hz ... 60Hz
Power Consumption at 1/8 maximum output power @ 4Ω		1800W
Protection	Audio limiter (APC), TBC, High temperature,
	DC, HF, Back-EMF, Peak current limiter,
	Inrush current limiter, Turn-on delay
Cooling		Front-to-rear, 4-stage-fans
Safety Class		I
Dimensions (W x H x D), mm		483 x 177 x 426
Weight		30kg

Amplifier at rated conditions, all channels driven, 8Ω loads, HI-Channel rated at 1kHz, LO-Channel rated at 60Hz unless otherwise specified. Note: 0dBu = 0.775V

32 P O W E R A M P L I F I E R S