Culinaire
Installation Instructions
4147.100
FAUCET AND PULL OUT SPRAY
with EverClean™ FinishCongratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.
•Permanent surface protectant remains beautiful for the life of the faucet
Certified to comply with ANSI A112.18.1M
. 3 & 7
• EverClean™ available on: Polished Chrome, Satin Nickel, Stainless Steel, Polished Brass (or any combination of these finishes)
To ensure that your installation proceeds
TOOLS REQUIRED
Phillips Screwdriver
Channel Locks | Adjustable Wrench | Plumbers' Putty or Caulking | 5VCJOH$VUUFS |
|
|
| INSTALL FITTING WITH OR WITHOUT DECK ESCUTCHEON | ||
|
| Turn off hot and cold water | |
CAUTION | |||
|
|
| supplies before beginning. |
|
|
|
Apply a bead of putty to bottom edge of ESCUTCHEON (1). Note: Installation of ESCUTCHEON (1) is optional.
Make certain the large SEAL (2) is properly seated in recess of faucet body.
Insert supply HOSES (3) and SHANK (4) through center hole of ESCUTCHEON (1) (if used) sink or mounting surface.
Assemble RUBBER WASHER (5), BRASS WASHER (6), and threaded LOCKNUT (7) onto SHANK (4) from underside of sink. Hand tighten LOCKNUT (7) and check that faucet is centered. NOTE: FAUCET CAN BE INSTALLED FOR RIGHT OR LEFT HAND APPLICATIONS.
Use a screwdriver to tighten the SCREWS (9) on LOCKNUT (7). Work your way around LOCKNUT (7), tightening the screws slightly each time until all are snug to ensure even pressure.
2
1
P U T T Y 3
9
LH RH
8
4
5
6
7