MAKE WATER SUPPLY CONNECTIONS
Turn off hot and cold water supplies before beginning.
Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect left supply (Marked with a Red Stripe) to Hot and right supply (Marked with Blue Stripe) to Cold wall supply. Use adjustable wrench to tighten connections. Do not over tighten.
Faucet supplies are 24" long from faucet base.
Note: If additional supply length is required, installer must purchase additional parts separately.
Important: If SUPPLY HOSES (1, 2) are too long, loop as illustrated to avoid kinking.
B L U E
R E DS T R I P E S T R I P E
2 
1COLD
HOT
CONNECT HOSE SPRAY and INSTALL WEIGHT
Tighten COUPLING NUT (2) to SPRAY HOSE (1). Figure 1
Install WEIGHT (4) onto HOSE (3) using two screws (5). locate WEIGHT (4) two feet from underside of mounting surface.
Figure 2
Tighten SCREWS (5) firmly.
HOT AND
COLD SUPPLIES
UNDER SIDE
OF MOUNTING
SURFACE
2
1 | 24" |
| 3 |
| 5 |
Figure 1 |
|
| 4 |
| Figure 2 |
. 3 & 7
