5 CHECK CONNECTIONS FOR LEAKS.

Move HANDLE down into "off" position.

Turn on water supplies and check connections for leaks.

Operate HANDLE (2) up and down, left and right to flush water lines thoroughly.

Operate HAND SPRAY and check connections for leaks.

CHECK CONNECTIONS

FOR LEAKS

6 SERVICE

If faucet drips, operate HANDLE several times from "off" to "on." Do not apply excessive force.

Clogged CARTRIDGE outlets or inlets may cause reduced flow. To clean, first turn off water supply then:

Remove INDEX BUTTON (1), loosen HANDLE SCREW (2) and remove HANDLE (3). Pull off ESCUTCHEON CAP (4). Remove CAP RETAINER (9). Unscrew three MOUNTING SCREWS (5).

Lift CARTRIDGE (6) off MANIFOLD (7) and remove CARTRIDGE SEALS (8). Clean MANIFOLD (7), CARTRIDGE (6) ports and SEALS (8).

Place SEALS (8) into CARTRIDGE PORTS (6A).

Place CARTRIDGE (6) onto MANIFOLD (7) and tighten MOUNTING SCREWS (5) alternately.

Replace ESCUTCHEON CAP (4), HANDLE (3), tighten HANDLE SCREW (1) and install INDEX BUTTON (2).

HOT LIMIT SAFETY STOP ADJUSTMENT

By restricting handle rotation and limiting the amount of hot water allowed to mix with the cold, the HOT LIMIT SAFETY STOP reduces risk of accidental scalding. To set the maximum hot water temperature of your faucets, all you need to do is adjust the setting on the HOT LIMIT SAFETY STOP.

2

3

 

1

 

 

4

9

5

6

6A 8

7

Remove HANDLE BUTTON (1) and loosen SET SCREW (2). Pull HANDLE (3) off valve stem. Pull off CAP (4). Use a flat blade screwdriver or your fingers to pull up and rotate red HOT LIMIT SAFETY STOP (5). Follow Step "A" or "B" to adjust min./max. discharge temperature. "0" being the hottest to "7" the coldest temperature setting. Factory set at "0".

Replace ESCUTCHEON CAP (4), HANDLE (3), tighten HANDLE SCREW (1) and install INDEX BUTTON (2).

"A"

PRY RED RING FORWARD AND ROTATE COUNTER- CLOCKWISE ONE CLICK

TEMPERATURE

SETTING NUMBERS

"B"

PRY RED RING FORWARD

 

 

"A"

"A"

 

 

 

 

0

 

ADJUSTMENT WHEN

1

 

 

2

 

 

WATER IS TOO HOT

3

 

 

4

 

 

 

5

 

 

 

6

 

 

 

AND ROTATE CLOCKWISE

"B"

ADJUSTMENT WHEN WATER IS TOO COLD

"B"

6

5

"RED RING"- HOT LIMIT SAFETY STOP

7 CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.

M968473 REV 1 . 4

Page 2
Page 3
Image 3
American Standard 4205.100 installation instructions Check Connections for Leaks, Service, HOT Limit Safety Stop Adjustment
Page 2

4205.100 specifications

The American Standard 4205.100 is a versatile and highly functional bathroom sink faucet designed for modern spaces. Renowned for its blend of aesthetics, durability, and advanced technology, this faucet is a popular choice among homeowners and builders alike.

One of the main features of the American Standard 4205.100 is its sleek and contemporary design. The faucet is available in various finishes, including chrome, brushed nickel, and oil-rubbed bronze, allowing it to seamlessly integrate into different bathroom styles. Its single-handle operation not only adds to the minimalist look but also makes it easy to adjust water temperature and flow with one hand.

In terms of technology, the American Standard 4205.100 is equipped with a ceramic disc valve. This innovative feature ensures a tight seal and smooth operation, reducing the risk of leaks and providing long-lasting performance. The ceramic discs are engineered to withstand wear, making the faucet not only reliable but also low-maintenance, as homeowners won’t need to worry about frequent repairs or replacements.

Another characteristic that sets this faucet apart is its water-saving capabilities. The American Standard 4205.100 is designed to provide a steady flow rate while minimizing water consumption. This efficiency is achieved without sacrificing performance, allowing users to enjoy a satisfying washing experience while being environmentally conscious.

Installation is made straightforward with the American Standard 4205.100, as it is designed to fit a variety of sink configurations. With all necessary mounting hardware included, homeowners and contractors can complete the installation with relative ease.

Furthermore, this faucet has undergone rigorous testing to ensure compliance with industry standards, enhancing its reliability and performance. Its solid brass construction also adds an additional layer of durability, ensuring that it can withstand the rigors of daily use in busy households.

In summary, the American Standard 4205.100 faucet stands out for its modern design, advanced ceramic disc technology, water-saving features, and ease of installation. It is an ideal choice for those looking to enhance their bathroom's functionality without compromising on style. Whether for a renovation or new build, this faucet promises to deliver both quality and elegance to any bathroom setting.
Top Page Image Contents