American Standard 4233.400 installation instructions Culinaire, Installation Instructions, 1 3 2

Installation

Instructions

Culinaire 4233.400

BAR/PANTRY FAUCET

with EverClean™ Finish

Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.

EverClean Finish

•One wipe effortlessly removes spots•Eliminates the need for cleaners and scrubbing

•Permanent surface protectant remains beautiful for the life of the faucet

Certified to comply with ANSI A112.18.1M

.      
3 & 7 
  

• EverClean™ available on: Polished Chrome, Satin Nickel, Stainless Steel, Polished Brass (or any combination of these finishes)

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

3FDPNNFOEFE
5PPMT

.BUFSJBMT

"EKVTUBCMF
8SFODI 1MVNCFSTh
1VUUZ
PS

5VCJOH
$VUUFS$BVMLJOH

INSTALL FAUCET

	CAUTION	Turn off hot and cold water
		supplies before beginning.

Make certain the large O-RING (1) is properly seated in recess of faucet body.

Insert supply TUBES (2) and SHANK (3) through hole of sink or mounting surface

Assemble RUBBER WASHER (4), BRASS WASHER (5), and thread LOCKNUT (6) onto SHANK (3) from underside of sink. Hand tighten LOCKNUT (6) Check that FAUCET is centered.

NOTE: Set screw is in back of faucet body.

Use a screwdriver to tighten the SCREWS (7) on LOCKNUT (6). Alternate tightening the SCREWS (7) slightly each time

until snug to ensure even pressure.

3FHVMBS
4DSFXESJWFS

1IJMMJQT
4DSFXESJWFS$IBOOFM
-PDLT

SET SCREW (IN BACK)

RECESS

1

3

2

4

5

6

7