American Standard 6013S installation instructions Speed Connect Drain, Install Faucet

	Installation
SWAN	Instructions
		6013
Centerset Lavatory Faucet with the		6013S
Speed Connect™ Drain

Congratulations on purchasing your American Standard faucet with the Speed Connect Drain, a feature found only on

American Standard faucets.

Speed Connect Drain*

•1/3 of the parts, installs in 1/3 of the time

•No tools needed

•Never needs adjustment

•Guaranteed to seal properly the first time, every time.

Certified to comply with ANSI A112.18.1

M968468 REV 1 . 2

*Your new American Standard faucet is designed to work only with the Speed Connect drain. Helpful tips for removing your current drain can be found in the Troubleshooting section of these instructions.

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Recommended tools

Screwdriver		Channel Locks	Adjustable Wrench	Tubing Cutter
1 INSTALL FAUCET		Turn off hot and cold water
	CAUTION
		supplies before beginning.

Turn off hot and cold water supplies before beginning.

Insert FAUCET (1) and CABLE CONNECTOR (2) through mounting holes of Sink or mounting surface. Fig. A.

Fig. A.

Assemble LOCKNUTS (3) onto SHANKS (4) (from under side of Sink). Hand tighten firmly. Fig. B.

(HAND TIGHTEN)

3

4	4	POP-UP
		CABLE

Fig. B.

SINK OR

MOUNTING

SURFACE

2

3

2

1