Installation Instructions
GREEN TEA ACCESSORIES | 7010.190 |
7010.210 | |
TOWEL RING | 7010.211 |
ROBE HOOK | 7010.230 |
DOUBLE ROBE HOOK |
|
TISSUE HOLDER |
|
Thank you for selecting
To ensure that your installation proceeds
Certified to comply with ANSI A112.18.1
M968630 Rev . 1 . 1
Recommended Tools
Regular Screwdriver
10'
| Drill |
Tape Measure | Phillips Screwdriver |
|
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH WITH A COARSE SURFACE.
1 | TOWEL RING, ROBE HOOK and TISSUE HOLDER |
MOUNTING BRACKET INSTALLATION |
The TOWEL RING, ROBE HOOK and TISSUE HOLDER work best if secured to a wall stud or cross brace within the wall, using
If the TOWEL RING, ROBE HOOK and TISSUE HOLDER are to be installed on a tile or plaster wall the ANCHORS (4) and SCREWS (2) should be used.
Determine desired height and location (optional) for the accessory and mark a center line. If MOUNTING BRACKET (1) is secured to a stud or cross brace drill small pilot holes for SCREWS (3). (NOTE PROPER POSITION OF MOUNTING BRACKET FOR ACCESSORY TO BE INSTALLED.}
For installations on drywall or tiled walls, use ANCHORS (4) and SCREWS (2) for securing MOUNTING BRACKETS (1) to wall. Use MOUNTING BRACKET (1) as a template and mark the mounting holes. Drill three 1/8" diameter holes a minimum of
Secure MOUNTING PLATES (1) to wall with SCREWS (2).
LEVEL
1
3 | 2 |
|
CENTER LINE
POSITION OF MOUNTING BRACKET FOR TOWEL RING AND ROBE HOOK
DRILL 3 PILOT HOLES FOR
4 WOOD SCREWS (2) OR 1/8" DIA. HOLES FOR ANCHORS (4)
POSITION OF MOUNTING BRACKET FOR DOUBLE ROBE HOOK AND TISSUE HOLDER