American Standard 7272.511, 7272.510 Care Instructions, Roughing-Indimensions, Turret Detail

ROUGHING-IN DIMENSIONS

7272.511

5-1/2"	6"
[140mm]		[152mm]
5-3/8"		INDEX 'CW'
[137mm

INDEX 'GAS' 9-3/4"

[248mm]

4-7/8" [124mm]

3-3/16" DIA. [81mm]

1-1/2" [38mm]

A-A

SECTION

TURRET DETAIL

1-15/16"

16"[49mm] [406mm]

2-1/8" 1-5/16" [54mm] [33mm]

3/8" NPT FEMALE

THREAD INLET (3 PLACES)

TOOLS AND SUPPLIES REQUIRED

Drill

Channel Locks Adjustable Wrench

1 INSTALL FITTING [7272.510 & 7272.511]

IMPORTANT: FLUSH ALL SUPPLY LINES PRIOR TO FITTING INSTALLATION.

Drill three 3/4" [19mm] Dia. holes using template provided or measurements as indicated through mounting surface.

Apply putty to underside of fitting base to assure a good seal and level fit.

Place body shanks through holes in deck and assemble steel mounting plate and lock nuts to body shanks. Tighten fitting to mounting surface.

Pipe to correct service to complete installation.

After installation is complete turn service on and check all connections for leaks.

PUTTY

BODY SHANK

(3) 3/4" [19mm] Dia. MTG HOLES

CARE INSTRUCTIONS:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR

WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH. DO NOT: CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH

WITH A COARSE SURFACE.LOCK NUTS

Teflon Tape

Plumbers' Putty or

Caulking

STEEL

MOUNTING

PLATE

M 9 6 8 4 8 9