American Standard 7411.722 installation instructions 7411.702, 7411.732, EverClean Finish, Fig. A

• Fewer parts, installs in less time

• Never needs adjustment

• Guaranteed to seal properly the first time, every time.

Installation Instructions

7411.702

7411.712

Centerset Lavatory Faucet with 7411.722 EverClean™ Finish & SpeedConnect™ Drain

7411.732

Congratulations on purchasing your American Standard faucet with EverClean finish and SpeedConnect drain, two features found only on American Standard faucets.

EverClean Finish SpeedConnect Drain*

•One wipe effortlessly removes spots

•Eliminates the need for cleaners and scrubbing

•Permanent surface protectant remains beautiful for the life of the faucet

•EverClean™ available on: Polished Chrome, Satin Nickel,

Stainless Steel, Polished Brass (or any combination of these finishes)

Certified to comply with ANSI A112.18.1

US60402 Rev. 1 . 1

*Your new American Standard faucet is designed to work only with the SpeedConnect drain. Heplful tips for removing your current drain can be found in the Troubleshooting section of these instructions.

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Required tools

ScrewdriverChannel LocksAdjustable WrenchTubing Cutter

1			Turn off hot and cold water
	INSTALL FAUCET	CAUTION
			supplies before beginning.

Turn off hot and cold water supplies before beginning.

Insert FAUCET (1) and CABLE CONNECTOR (2) through mounting holes of Sink or mounting surface. Fig. A.

Assemble LOCKNUTS (3) onto SHANKS (4) from under	Fig. A.
side of Sink. Hand tighten firmly. Fig. B.
(HAND TIGHTEN)

3

POP-UP

CABLE

44

Fig. B.

SINK OR

MOUNTING

SURFACE

3

2 2

1