1
Drill a clearance hole inside the cutout line.
Countertop |
Template |
Cutout |
template |
4
Mount the faucet and drain assembly following the manufacturer's instructions.
Countertop |
2
5
Cut opening on cut line of the template.
Note - Contact your countertop distributor for the best method of cut- ting materials such
as marble, hard syn- thetics, etc.
Countertop |
Template |
Cutout |
Connect supply lines to faucet finger tight, and carefully bend to engage with the supply stops. Tighten connections to faucet for secure seal.
6
3
INNER EDGE | 1" |
OF CUTOUT |
|
INSERT
CLAMP
WASHER
Connect drain assembly hand tight to check align- ment. It may be necessary to cut off part of the tailpiece (area "A") or part of the horizontal leg of the trap (area "B").
Secure joint for watertight assembly.
A
B
WINGNUT
SCREW
Trap
Single Bowl
Trap
Double Bowl
END
7 9 0 7 6 6 - 1 0 0 | 3 |