American Standard American Standard bath, 754323-100 Rev A manual Under Deck Mounting Instructions

UNDER DECK MOUNTING INSTRUCTIONS

Please note that care must be taken to protect the surface of the tub during all aspects of the installation. Do not drill or cut the bath deck with the tub directly beneath it as damage to the tub may result.

1.Install the tub per the installation instructions provided with the unit.

2.Prepare the bath deck support structure per the local codes. Note - the bath deck must be self supporting.

3.Cut bath deck to your specifications.

4.Place the bath deck in position and trace the opening on the tub with a soft pencil. Do not drill or cut the bath deck with the tub directly beneath it as damage to the tub may result.

5.Remove the bath deck and apply a generous bead of waterproof sealant on the outer edge of the traced line.

6.Replace the bath deck and secure it into place.

7.Apply additional sealant along the tub and bath deck interface as necessary to ensure a watertight seal.

8.Remove excess sealant per the manufacturer's instructions.

Finished bath deck surface material must be self-supporting and secured per local codes

Waterproof

Sealant

Bathtub

Bath deck support material

Tub support structure per installation instructions provided with the tub

DRAIN CONNECTION AND

SYSTEM TEST

(before installing bath into

framed out structure)

With supplied cable drain assembled to bath, connect drain outlet to waste line in accordance with the drain assembly instructions. Tighten all drain joints securely. Check the couplings and make sure they are hand-tight. Clean the air bath and fill with water to a point 2" below the overflow. Recheck the couplings and make certain that they are not leaking. (Although the couplings are factory tightened and inspected, some loosening may have occurred during transit.) Make sure the air bath is connected to the electrical supply and turn the air bath on. Check for leaks around all piping connections while the air bath is running.

OVERFLOW ASSEMBLY

VERTICAL

DRAIN PIPE

AIR BATH DRAIN ILLUSTRATION

DRAIN STOPPER

WITH

ADJUSTABLE

BOLT

METAL STRAINER

BOLT

METAL

STRAINER

		FLAT RUBBER
CLOSE	OPEN	GASKET

DRAIN WASTE

FLANGE

PLASTIC DRAIN BASE

WEDGE OVERFLOW

GASKET ESCUTCHEON

OVERFLOW

ASSEMBLY SET SCREW

DRAIN ACTUATOR SHAFT	OVERFLOW
	RETAINER
OVERFLOW NUT WITH O-RING
	AIR BATH NUT
	WITH WASHER
	AND GASKET

90˚ ELBOW	HORIZONTAL	PLASTIC
		DRAIN BASE
	DRAIN PIPE

754323-100 Rev A 16