![1TRIM INSTALLATION](/images/new-backgrounds/36848/368483x1.webp)
1TRIM INSTALLATION
Push VALVE COVER (1) over VALVE CARTRIDGE (2) until it is seated against the stop.
Place ESCUTCHEON HOLDER (3) over VALVE COVER (1). Line up holes in ESCUTCHEON HOLDER (3) with THREADED TABS (4) on VALVE. Install MOUNTING SCREWS (5) through ESCUTCHEON HOLDER (3) and into THREADED TABS (4). Tighten SCREWS securely.
Place ESCUTCHEON (6) over ESCUTCHEON HOLDER (3) and push evenly for a snap fit.
2
1 3
6 4
5
2HANDLE INSTALLATION
Install KNOB MOUNT (1) onto VALVE STEM (2). Thread HANDLE SCREW (3) into VALVE STEM (2) and tighten. Align HANDLE (4, 4a) and push onto KNOB MOUNT (1).
Tighten SET SCREW in handle with HEX WRENCH (5) SUPPLIED.
2 1
4
4a
3
5
3OPERATING THE VALVE
Turn HANDLE into OFF position.
Turn on water supplies, and check all connections for leaks. Operate HANDLE to flush water lines thoroughly.
Turn handle OFF.
ON
OFF
M 9 6 8 6 6 3