Ameriphone manual Insert 4 AA Batteries Here, Setting up Your XL-50

Setting up Your XL-50

	There are five initial steps involved
			To install new batteries:
	in setting up your XL-50.
			1. Slide open the battery
	1. Insert four AA alkaline batteries
	for back-up in case of AC		compartment cover on the
	power outage.		bottom of the telephone
	2. Decide if you want the		(Figure 3).
	phone to sit on a desk or		2. Install four fresh batteries. Be
	hang on the wall.
			sure to observe battery polarity
	3. Connect the telephone
			as imprinted on the base of
	components.
			the compartment. The battery
	4. Program up to 12 telephone
			indicator on the top panel will
	numbers to call with the
			light up if the batteries are
	press of a memory button.
			running low.
	5. Set up special features
			The phone operates as a regular
			phone if there is no power or battery.
	Installing the Backup Batteries
	If there is a power outage, the
	XL-50 will operate for up to 48		XL-50 Low Battery Indicator
	hours with four AA alkaline
	backup batteries (not included). If		If the batteries are weak or not
	the phone is not in use, the batteries		installed, the Low Battery indicator
	will stay charge for several months.		will light up. Install fresh batteries
			according to the directions above.
	Insert 4 AA
	batteries
	here
	Press in
	here with a
	tip of a pen
	to open	Figure 4 - Low Battery Indicator Light
	b tt
Figure 3 - Accessing the Batteries		4

E

N G L I S H