E
N
G
L
I
S
H
Note: In standard use, the
amplifier turns off when you hang
up the telephone. This is a useful
feature if many people use the
phone. If you want the amplifier to
always remain on, slide the
Volume Reset Override switch on
the bottom of the phone to ON, as
shown in Figure 11.
Incoming Voice Tone
The XL-50 provides extra
amplification in the sound frequency
range you need to boost. To
identify the range that best suits
your needs, follow these steps:
1.When you hear a voice on the
line, press the AMPLIFY button
shown in Figure 9.
2.Adjust the TONE slide control in
Figure 12 to suit your hearing. 8
Using Your XL-50
(Continued)
Ringer Volume and Tone
1.You can adjust the RINGER
VOLUME as high as 95+
decibels. The settings available
are LO, MED and HI as shown
in Figure 13.
2.The RING TONEhas two pitch
settings: LO and HI.
Hold
To put the line on hold, press the
HOLD button and return the handset
to its cradle. You will notice the
HOLD indicator light comes on.
0#
HOLD PROG
TONE
LO HI
FLASH REDIAL
VOL
AMPLIFY
*
Figure 12 - Tone Slide Control
RINGER RING TONE DIAL AUDIO
OUTPUT
Lo Med Hi T P
Lo Hi
Figure 13 - Ringer Volume & Pitch
MANUAL
AUTO
Figure 11 - Volume Reset Override
On/Off
- OFF
- ON
Volume
Reset
Override