Ameriphone RC-200 Auto Dialing the first number stored in M1, Dialing by using the Scan button

CHAPTER 5 (CONTINUED)

Auto Dialing the first number stored in M1.

A. From keypad

1. Press ON/OFF button or just press M1.

2. The number is dialed automatically

within 7 seconds.

4.The DIALOGUE RC automatically dials the number selected.

5.Press the ON/OFF button to hang up.

M U T EF L A S H / P A U S E

ON/OFF

H E A D S E TR E D I A L

M I C

Figure 16

B. Using Remote Transmitter With Scan
function on:
1.	Press Remote Transmitter.
2.	The number is dialed automatically
	after scanning all memories 3 times.
C. With Scan function off:
1.	Press Remote Transmitter.
2.	The number is dialed automatically.

Dialing by using the SCAN button

Before you can use memory scanning for dial- ing, you must have the phone numbers stored in the memory first (page 6). To use memory scan- ning, the Scan function must be on. See Chapter 4 section C. Memory locations with no number stored are skipped. The memory direc- tory is scanned three times or until a number is selected. If no number is selected, the first number in M1 is dialed.

V O L		M U T E
P R O G	SCAN	H E A D S E T
1. Press the SCAN		M I C
button.
	Figure 15

2.The memory location indicators light up as it scrolls down the memory locations.

If you have DIALOGUE RC–100: Only the first six memory locations are scanned.

If you have DIALOGUE RC–200: All 20 memory locations are scanned (It "beeps" when advancing to the next memory location.)

3.When the desired memory location is lit, press the SCAN button again to select.

Dialing using the Remote Transmitter

A. With Scan function on:

1.Press the Remote Transmitter to begin

scanning.

Figure 17

2.When the desired memory location is lit, press the Remote Transmitter. The DIALOGUE RC automatically dials the number selected.

3.Press the Remote Transmitter once to hang up.

B.With Scan function off:

1.Press the Remote Transmitter once.

2.It dials the first number stored in M1.

C.Answering phone calls

Using the keypad
1. When the phone rings,	M U T E	F L A S H / P A U S E
press the ON/OFF	H E A D S E T	ON/OFF
		R E D I A L
	M I C
button to turn it on.
2. When finished, press		Figure 18
the ON/OFF button to
hang up.

Using the Remote Transmitter

1. When the phone rings, press the Remote Transmitter to turn on.

2. Press the remote	Figure 19
button once to hang up.

7