If the DIALOGUE RC rings three or more times and is not
answered, the FLASH/PAUSE Figure 23 light flashes to indicate that you
missed a call.Turning on the DIALOGUE RC cancels the indicator.
Telebanking and Credit Card Calling
You can transmit account or personal identification numbers (PIN) from the DIALOGUE RC by pre–storing them in memory.
1. Program account or PIN numbers into a memory location in advance by following the same steps you would program a phone number.
2. When the automated phone system requests it, press the memory button where your account number or PIN is stored.
R E D I A L
AD S E T
O N / O F F
Unanswered Call Indicator
MU T E
FLASH/PAUSE
Figure 22
R E D I A L
AD S E T
O N / O F F
MU T E
FLASH/PAUSE
If you subscribe to voice mail service from your phone company, the FLASH/PAUSE light flashes and the RC beeps (once every 3.5 minutes) to inform you that you have voice mail messages. You also hear a special "stut-
ter" dial tone sent from the
phone company. To retrieve your messages, follow the instructions
provided by your phone company. Making an outgoing call cancels the indicator light.
If you have the DIALOGUE RC–200, you can use the Flash feature with the Remote Transmit- -ter. Turn the Remote Flash switch on (see Chapter 4 section C). When you are on the phone line, press the Remote Transmitter button twice in succession, within three seconds, to generate the “flash”.
Voice Mail Indicator (VMI)
CHAPTER 5 (CONTINUED)
Voice Activated answering (DIALOGUE
RC–200 only)
1.The voice activated Answering feature has been preset to OFF in the factory. To activate this feature, see page 5.
2.Say "Hello" or whistle loudly, between rings. (If a headset is used, answer by speaking into the headset microphone.)
3.Use the remote control, or press the ON/OFF button on the console to hang up.
Please Note: When the party that called you hangs up, the telephone company switching office may re-establish a dial tone on your line.
When dial tone returns, your RC–200 will hang up automatically. Prior to hanging up, the RC–200 emits two short beeps as a reminder.
D.Other Operations
Redialing the last number dialed
1.Press the REDIAL button on the keypad.
OR
2.Press and hold the Remote Transmitter for 3 seconds, until the ON/OFF indicator on
DIALOGUE RC turns on.
Flash button
M U T EF L A S H / P A U S E
H E A D S E TREDIAL O N / O F F
M I C
Figure 20
F L A S H / P A U S E
ON/OFF
R E D I A L
Figure 21
The flash button is used to access special tele- phone functions and services available from your local phone company, such as call waiting, 3–way calling, and others. Call your phone company for more information.
