Special Features (Continued)

To type a TTY message, use the keys of the keypad and their corresponding letters (i.e. number 2 is also for letters A, B, and C). On the screen, watch the character above the cursor change as you repeat- edly press the same key. When the desired letter is shown, wait one second for the cursor to advance to the next space. Then enter the next character. SPACE is used as the space bar, and BACK- SPACE is used for backspace and correc- tion. The letters “Q” and “Z” are located in key number 1, other characters of punc- tuation are created with the *, 0, and # keys.

Text Transmission Speed Selection:

The Dialogue VCO defaults to the U.S baud rate of 45.5 when using text com- munications. To change to International baud rate, just press SELECT then AUTO ANS. The screen will read "INT SPEED SELECTED." You can switch back to U.S. speed in the same manner or by hanging up.

Acoustic Coupling of a TTY to the Dialogue VCO:

1.Pick up the handset and place it into TTY acoustic cups.

2.Dial number from the Dialogue VCO keypad.

3.Press SELECT to go to Baudot mode.

4.Press 1 key four times until "&" appears on the screen.

5.Continue conversation using the TTY.

6.When finished, hang up the handset.

Using Auto Answering Machine

The automatic answering machine of the Dialogue VCO can record 1728 total characters in text messages. The answer- ing machine sends out the factory preset outgoing message that reads "THX U FOR CLG, PLS LV A MSG GA" to greet each caller.

To Turn on the Answering Machine:

1.Pick up the handset.

2.Press the AUTO ANS button. The screen reads: “AUTO ANS ON 00 MSG 1=READ 2=ERASE 3=OFF”. The number of old messages previously received will be displayed until you erase them. Erase old messages when not needed to ensure enough memory for new messages.

3.Hang up the handset. The answering machine is now ready to take messages.

16

Page 18
Image 18
Ameriphone VCO Using Auto Answering Machine, Text Transmission Speed Selection, To Turn on the Answering Machine