Ameriphone XLXL-40 manual Insert 4 AA batteries here, Setting up Your XL-40

Setting up Your XL-40

E

N G L

There are five initial steps involved in setting up your XL-40 for the first time.

1.Insert four AA alkaline batteries for back-up in case of AC power outage.

2.Decide if you want the phone to sit on a desk or hang on the wall.

3.Connect the telephone components.

4.Program up to 12 telephone numbers to call with the press of a memory button.

5.Set up special features

Installing the Backup Batteries

To install new batteries:

1.Slide open the battery compartment cover on the bottom of the telephone (Figure 3).

2.Install four fresh batteries. Be sure to observe battery polarity as imprinted on the base of the compartment. The battery indicator on the top panel will light up if the batteries are running low.

The phone operates as a regular phone if there is no power or battery.

I

S

H

If there is a power outage, the XL-40 will operate for up to 48 hours with four AA alkaline backup batteries (not included). If the phone is not in use, the batteries may last for several months.

Insert 4 AA batteries here

Press in here with a

tip of a pen to open

b tt

Figure 3 - Accessing the Batteries

XL-40 Low Battery Indicator Light

If the batteries are weak or not installed, the Low Battery indicator will light up. Install fresh batteries according to the directions above.

HOLD PROGFLASH REDIAL

TONE	AMPLIFY
	VOL
LO	HI

Figure 4 - Low Battery Indicator Light

4