Using Your XL-40
Incoming Voice Volume
You can adjust the volume of incoming calls by simply sliding the VOL control. This gives you up to 18 dB more volume. If you want more amplification, follow the directions below.
1.Press the AMPLIFY button as shown in Figure 9 to turn the incoming voice amplifier on or off. When AMPLIFY is on, the AMPLIFY indicator comes on.
HOLD*PROG | 0 |
| # |
FLASH | REDIAL | ||
TONE | AMPLIFY |
| VOL |
|
| ||
LO | HI |
|
|
Figure 9 - AMPLIFY Button and Indicator
2.Adjust the ear piece volume while on a call by moving the VOL slide control in Figure 10. With AMPLIFY on, incoming volume will be up to 40dB louder.
HOLD*PROG | 0 |
| # |
FLASH | REDIAL | ||
TONE | AMPLIFY |
| VOL |
|
| ||
LO | HI |
|
|
Figure 10 - Volume Slide Control
Caution: Repeated incremental exposure to amplification levels greater than 18 dB may be harmful to individuals without hearing disabilities. Therefore, do not remove the warning label attached to the back of the handset. If it is likely that a visually impaired person will use the telephone, securely attach the provided warning printed in Braille to the back of the handset (See Diagram A).
C A U T I O N
U S E W I T H
VOLUME
LOUD
Diagram A.
7
