Specifications
Maximum gain
High frequency (3kHz): 40dB Wide band (300 to 3000Hz): 30dB
Tone control range
Full range: 300 to 3000Hz using one slide control.
Dimensions
Size: 9 1/2" x 7" x 3 1/4"
Weight: 2.52 lbs.
Power Requirements
AC Adapter: 9VDC, 300 mA
Batteries: 4 AA alkaline batteries (not included)
21
Troubleshooting Chart
The chart below will help you solve most problems that may arise during operation of your telephone. Should the difficulty continue, contact Ameriphone or your authorized dealer for assistance.
| CAUSE AND | ||
SYMPTOM | CORRECTIVE | ||
| ACTION | ||
No dial tone | Check all phone | ||
| cord connections. | ||
No number | No number stored in | ||
dialed when | that memory | ||
memory | button. See: | ||
button pressed | “Programming the | ||
| Memory buttons”, P. 10. |
| |
Call cannot | See “Setting Up | ||
be dialed, | Your Phone” to reset | ||
or dials | the dial mode | ||
switch, P. 5, 6. | |||
very slowly | |||
|
| ||
Call comes in | 1. Check that line | ||
cord is not loose. | |||
but phone | 2. Check that AC | ||
does not ring. | adapter is | ||
| plugged in. | ||
1.Unplug the
Phone locks up. AC adapter.
No2. Remove backup
functions | batteries. |
operate | 3.Then, plug in the |
| AC adapter |
| and reinstall |
| batteries. |
