Amphony 1000 manual User and Installation Guide, Connecting the transmitter, Page

Models: 1000

1 8
Download 8 pages 1.29 Kb
Page 2
Image 2
User and Installation Guide

User and Installation Guide

R

Unpacking: Check that this package contains:

One set of 2.4 GHz Digital Wireless Headphones, one 2.4 GHz Digital Audio transmitter, one AC adapter, one dual RCA audio cable.

￿￿￿￿￿￿ Connecting the transmitter

The transmitter connects to a line-out interface via the supplied RCA cable. Most audio devices provide a line-out interface.

If no line-out interface is available, the transmitter can also be connected to other audio outputs by using an appropriate adapter. It should be noted that the audio level of the audio output should conform to the standard line output level (Vpp ± 2.8 V maximum).

If the audio level is too low, the dynamic range of the transmitter is not fully used. If the audio level is too high, clipping at high audio levels may occur. If clipping occurs, either use an adjustable output (such as a headphones output) or use an Amphony audio level attenuator.

Connect the DC power input with the supplied AC adapter. The use of a surge protector is recommended to protect the transmitter from power surges.

ATTENTION!

Never connect the DATA OUT output to an audio source since this may damage both the transmitter and the audio equipment !

AUDIO

DATA

 

IN

OUT

DC 9V

L R

Transmitter

AC adapter

DC 9 V 300 mA

AUDIO

LINE OUT

L R

Power outlet

Audio Source

Page 1

Page 2
Image 2
Amphony 1000 manual User and Installation Guide, Connecting the transmitter, Page