User and Installation Guide
R
Technical Specifications
Transmitter:
Audio transmission method: Digital
Transmitter frequency: 2.4 GHz
Dynamic range: typ. 100 dB 1)
Channel separation: typ. 100 dB 1)
Harmonic distortion: typ.
Error correction: 1/2 rate FEC
Audio sampling method: 64 times oversampling
Transmitted data rate: > 3 Mbps
Data available at
Max. Transmitter output power: 1 mW
Transmitter operating range (without RangeBooster modules): max. 200 ft. line of sight, max. 50 ft. through walls and ceilings
Headphones:
Type: dynamic, closed
Operating time: max. 100 hours with two AA batteries
Frequency response: 20 Hz ... 24 kHz
Maximum sound pressure level: 120 dB
Note: 1) Performance is given for operation with a digital audio interface
Copyright (C) 2002 Amphony. All rights reserved.
The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes and/or additions.
All product names, trade names, or corporate names mentioned in this document are acknowledged to be the proprietary property of the registered owners.
FCC ID PMJT2000
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Made in China.
Page 10
