R
User and Installation Guide
Unpacking: Check that this package contains:
One 5.8 GHz Digital Audio transmitter - Model 1550, two 5.8 GHz Digital Audio amplifiers - Model 1550, one small and two large AC adapters (wallwarts), four short speaker cables, one RCA audio cable.
Step1Connecting the transmitter
The transmitter connects either to a standard
If the transmitter is connected via speaker cables, observe the polarity of the cable connection to ensure that the transmitter will be fed with a correct polarity signal. If one of the cables is switched (reversed), one speaker will receive an opposite polarity signal which will degrade sound performance.
The transmitter can also be connected to other audio outputs by using an appropriate adapter.
Connect the supplied small AC adapter’s
ATTENTION!
Do not use both the speaker cables and RCA cable. Do not connect speakers to the transmitter. Do not connect the large AC adapter to the transmitter.
Copyright (C) 2010 Amphony. All rights reserved.
The information contained herein is subject to change without notice. Revisions may be issued to advise of such changes and/or additions.
All product names, trade names, or corporate names mentioned in this document are acknowledged to be the proprietary property of the registered owners.
FCC ID PMJT1500
This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions: 1) This device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
