R
User and Installation Guide
Step4Operating the transmitter
After powering up the transmitter, the transmit light will go on for approximately five seconds while the transmitter initializes.
After initialization, the transmit light will go out.
Initially, set the transmitter volume control to a middle setting.
Once audio is detected at the audio input, the transmit light will go on and the transmitter will transmit the audio signal.
When audio is no longer detected, the transmitter will go into standby mode after approximately one minute. The transmit light will go out. During standby mode, no signal is transmitted.
Transmit light
5.8 GHz Digital Audio Transmitter
R
Transmitter volume control
L | R | DC 9V |
L
R
Page 6