Amphony L1600, PMJT1500 manual Placing the transmitter and amplifiers, Page

Models: PMJT1500 1600 L1600

1 24
Download 24 pages 3.06 Kb
Page 6
Image 6
Step3Placing the transmitter and amplifiers

R

User and Installation Guide

Step3Placing the transmitter and amplifiers

For best reception, we recommend that each amplifier be placed within the line of sight from the transmitter. If possible, each amplifier should be placed right side up with its front toward the transmitter.

The transmitter should be placed at an elevation such that there are no obstacles between the transmitter and amplifiers (line of sight) in an area where there will be the least amount of traffic. We suggest that you place the transmitter on top of your audio source. Example 1 below shows the optimum placement of the transmitter and an amplifier. If no line of sight is possible, place the transmitter and amplifiers such that there is the minimum possible number of walls and obstacles between the transmitter and each amplifier.

The amplifiers can also be placed as shown in example 2. In this case, no line- of-sight connection exists and the operating range is reduced.

You can mount the amplifiers vertically by using the 2 screw openings at the bottom of each amplifier. If the amplifiers are mounted vertically, the operating range is reduced compared to mounting the amplifiers right side up.

Each amplifier incorporates a directional antenna which prefers signals transmitted toward the front of the amplifier. Therefore, the front of the amplifiers should always be facing toward the direction of the strongest transmitter signal. By properly orienting each amplifier, interference from other signal sources can be minimized.

We suggest that you experiment with placement in order to find the best location for the transmitter and amplifiers.

Note: This product will not work properly from within an enclosed metal cabinet.

Transmitter

line of sight

Speaker

 

Transmitter

 

Amplifier

indirect connection

Amplifier

(reflected signal)

 

 

Speaker

Example 1: Amplifier placed on top of a speaker

Example 2: Amplifier mounted vertically behind a speaker

Page 5

Page 6
Image 6
Amphony L1600, PMJT1500 manual Placing the transmitter and amplifiers, Page, Example 1 Amplifier placed on top of a speaker