4081 User Manual | Issue 2 |
Installing the software – Mac
If you are installing this
software over a
previously installed version, you MUST uninstall the previous version first before you replace it with the newer version.
The install procedure below is for Mac software version 10.4 or later.
>At any point in the install, you can return to the previous screen by click Back.
If you have a different version of software installed, there may be subtle differences on the screens shown below, but the basic install is still the same.
>Double click on the icon called Remote Mic Control.pkg and the install program will open with the Welcome screen.
>Click Continue.
The Information screen will display where the software will be installed on the Mac.
>Click Continue.
The License Agreement screen will open.
>Click Continue.
You will be asked to confirm that you have read the agreement.
>Click Agree.
If you click Disagree, the Install procedure will terminate.
You will be asked to select a location to install the software to.
>Click on Macintosh HD as shown left, so a green arrow is placed on the drive
>Click Continue.
- 17 -