Wiring, Pin Header, AXlink | AMX AXP-AI8 specs

Installation

Be sure that the board input ground is connected to the voltage source ground prior to applying a voltage to the input.

Wiring

FIG. 4 shows typical joystick wiring:

2 Pan 2

Tilt

Tilt4 Zoom 6

GND17, 18

Focus 8

+5 VDC REF 19,20

FIG. 4 Typical joystick wiring

20-Pin Header

The following table lists the pinouts for the 20-pin header:

20-Pin Header - Pinout Information

Pin	Function	Pin	Function

1	GND	11	GND

2	INPUT 1	12	INPUT 6

3	GND	13	GND

4	INPUT 2	14	INPUT 7

5	GND	15	GND

6	INPUT 3	16	INPUT 8

7	GND	17	GND

8	INPUT 4	18	GND

9	GND	19	+5 VDC REF

10	INPUT 5	20	+5 VDC REF

AXlink

To install the AXlink data/power bus wiring:

1.Strip .25 inch off the wire insulation for all four wires. If the wire is 20 AWG or less, fold the exposed wire over to obtain a positive connection.

2.Insert each wire into the appropriate opening on the connector. See FIG. 4.

3.Turn the captive screws clockwise to secure the fit. Do not over torque the screw; doing so can bend the seating pin and damage the connector.

FIG. 5 shows the wiring configuration for AXlink cables.

	4	AXP-AI8 Eight-Channel Analog Interface Board

AXP-AI8 specifications

The AMX AXP-AI8 is a sophisticated audio distribution and processing device designed for professional audio applications, particularly in environments where high fidelity and extensive control over audio are paramount. This model combines cutting-edge technology with user-friendly interfaces, making it an excellent choice for both installation in commercial settings and use in various live sound scenarios.

One of the standout features of the AXP-AI8 is its capacity for high channel counts, supporting up to eight channels of audio inputs and outputs. This makes it ideal for complex installations that require multiple audio sources and destinations. Additionally, the device supports various audio formats, ensuring compatibility with a wide range of systems and equipment.

The AXP-AI8 is engineered to deliver superior audio quality, featuring high-performance AD/DA converters that minimize distortion and maximize dynamic range. This technological advancement allows for crystal-clear sound reproduction, which is critical in both live sound reinforcement and studio settings. Furthermore, the built-in DSP processing capabilities enable users to apply custom equalization, compression, and other audio effects, tailoring the sound to meet specific needs.

Connectivity is also a major focus of the AXP-AI8. It boasts a variety of input and output options, including XLR, TRS, and digital connections, allowing seamless integration with existing audio infrastructure. The device supports network audio protocols such as Dante and AES67, which facilitate easy audio routing over a network and make it highly versatile for modern audio applications.

User interface design is another strong point. The AXP-AI8 features an intuitive touchscreen interface that enables users to navigate through functions efficiently. This graphical representation simplifies the setup process, making it accessible even for those with limited technical expertise. For advanced users, the device supports remote control and monitoring via software applications, providing further flexibility in managing audio setups.

In summary, the AMX AXP-AI8 is a powerful audio processing solution that combines high channel capacity, unmatched audio fidelity, extensive connectivity options, and an intuitive user interface. Its versatile nature makes it suitable for various applications, from corporate installations to live sound events, ensuring it meets the demands of today’s audio professionals.

AMX AXP-AI8 instruction manual Wiring, Pin Header, AXlink

Models: AXP-AI8