AMX NXC-ME260 instruction manual Edit Group menu Display Access Rights, Delete Group

NetLinx Security

Edit Group menu: Display Access Rights

1.At the Edit Group prompt, type 5 to view the current access rights for the selected group account. A sample session response is:

Terminal (RS232)	Disabled
Admin Password Change	Disabled
FTP	Disabled
HTTP	Disabled
Telnet	Disabled
Security Configuration	Disabled
Press <ENTER> key to continue

The Master must be rebooted after changing the HTTP setting.

2.Press <ENTER> to return to the Edit Group menu.

8) Edit Group

1.Type 8 and <ENTER> at the Security Setup prompt (at the bottom of the Main Security Menu) to edit an existing group account. A sample session response is:

Select from the following list:

1)administrator

2)Group 1

3)Group 2 Select group ->

2.Select a group from the list of currently enrolled groups and press <ENTER> to open the Edit Group Menu. This is the same Edit Group Menu that was access via the Add Group option:

1)Add directory association

2)Delete directory association

3)List directory associations

4)Change Access rights

5)Display Access Rights

This menu is described on the previous pages (see Edit Group Menu on page 35).

9) Delete Group

1.Type 9 and <ENTER> at the Security Setup prompt (at the bottom of the Main Security Menu) to delete an existing group account. A sample session response is:

Select from the following list:

1)Group 1

2)Group 2 Select group ->

2.Select the group account to be deleted, and press <ENTER> to delete the group and return to the Security Setup menu.

NXC-ME260 NetLinx Master-Ethernet Card/Module 37