AMX R-1 Mio Remote Charging Base

Mio Remote Charging Base

Mio Modero R-1

Mio Remote Charging Base

The Mio remotes are complemented either with a Mio-RCC charging base (FG147-02) or the

Mio-RCC rechargeable upgrade kit (FG147-03K). One charging base, a new back housing and a

Mio-RBP rechargeable lithium ion battery (FG147-10) are included with the rechargeable upgrade kit.

The charging base upgrade kit transforms the Mio R-1, R-2 and R-3 into a rechargeable device.

Begin with Installing The Rechargeable Battery for the Mio-RCC rechargeable upgrade kit

(FG147-03K) or Charging The Mio Remote with Charging Base for the Mio-RCC charging base

(FG147-02).

FIG. 5 Mio-RCC Charging Base

Contents

Main AMX Limited Warranty and Disclaimer Software License and Warranty Agreement Page Table of Contents Page Overview The Mio Modero R-1 Touch And Tilt Sensor Specifications The Mio R-1 device specifications are as follows: Mio R-1 Specifications Mio R-1 Setup Installing Your Custom Buttons Inserting Batteries into The Mio R-1 Battery Low Indicator Page Programming The Mio R-1 Using Connector Ports on The Mio R-1 1. 2. 3. 4. IR Code Matrix IR Code Matrix Configuration Mode 1. 2. IR Transmit Mode Timeout Adjustment Setting The IR Frequency Updating Mio R-1 Firmware Persistent Serial Commands Serial Commands Mio Remote Charging Base Specifications The specifications for the Mio remote charging base and kit are as follows: Mio-RCC Remote Charging Kit (FG147-03K) with Base (FG147-02) Specifications Installing The Rechargeable Battery Charging The Mio Remote with Charging Base Changing Battery Modes