Programming The Mio R-1
7
Mio Modero R-1
Configuration Mode
The configuration mode allows you to set the following device features:
IR Transmit Mode (38 KHz or 455 KHz)
Timeout Adjustment
Download Mode
Debug Mode
Battery Type
LED Awake Brightness
Sleep Brightness
To enter configuration Mode:
1. Press and hold the STOP button and the INPUT button. The two buttons must be pressed within 0.1
seconds of each other and held down for 2 seconds. The device indicates you are now in
configuration mode. See below for available modes.
2. Press the EXIT key when you are finished.
Note: Your settings will not be lost in the event your batteries die or are removed.

IR Transmit Mode

Pressing button "1" on the remote toggles the IR transmission mode between 38Khz and 455Khz. The
display indicates the current mode.

Timeout Adjustment

Press button "2" on the remote to change the sleep timeout from the default. Each time "2" is pressed, the
sleep timeout raises incrementally. The pre-determined sleep timeouts are:
3 seconds
6 seconds
9 seconds
12 seconds
The display indicates the selected sleep timeout.
IR Code Matrix (Cont.)
Button Label Mode
1
Mode
2
Mode
3
Mode
4
Mode
5
Mode
6
41 S. REV Z7 47 87 127 167 207
42 PLAY A1 41 81 121 161 201
43 S. FWD Y6 46 86 126 166 206
44 REW E5 45 85 125 165 205
45 FWD D4 44 84 124 164 204